Grafix Dura-Lar 0.005" Film, Matte, Translucent 9"x12", Economical Alternative to Drafting Film, Mylar and Acetate, Translucent Drawing Surface for Lead, Ink, Charcoal and Paint, Pad of 25 Sheets

I am using this to protect artwork from being damaged as we scan it on a wide format scanner. Keeps the ink from rubbing off onto the scanner. Also stops scanner from scratching the art. Excellent product

Worked great for a stencil on my girls night mat painting project. My glowforge Machine cut it perfectly all the way through without fire ! Thick material cant pull it apart must use scissors to cut.I thought it was the sticky on one side but wasn’t but that was my bad

I was looking for an environmental friendly way to protect my wooden dining table, or to avoid washing the cotton table cloth all the time.My wife wouldn't approve off any plastic table cloth that look a lot worse than her current beautiful one. I tried the temporary plastic table cloth for parties, and try to let it stay on the table as long as I can. That won't be a solution and they are too thin to be convenient. They are easily punctured.I was looking for a clear plastic sheet to cover the current table cloth so she wouldn't notice much. The ones on the market are mostly PVC. When I replaced the kid's shower lining last time, I though I was lucky to discover the cheapest plastic liner on the world in Target in a very hard to find corner. I didn't realize that the awful smell that we tolerated for days were toxic. Now we have PEVA instead. So obviously I won't get a PVC anything for my dining table.I didn't thought of just using a large piece of glass. But this will only be applicable for putting on wood directly. It will be too much trouble to change the table cloth if the glass is on top. For glass you need other table mats for cushion.Now this polyester sheet is perfect. It is actually 40 inch by 12 feet. It wouldn't make sense if it were 12 inch long. The only con is that I have to pay for 12 ft rather than 6 ft. And I have to cut it to size.Once unrolled, it has a tendency to stay flat. So it was easy to work with. It looked like glass, but you can't find the thickness at the edges.I boiled a pot of water, stopped the heat, let the bubbles subside, and put it on a piece of spare sheet. It didn't do anything to it. No marks. No signs of softening or melting.There is absolutely no smell of any type. This particular sheet is not FDA approved for food contact, but polyester the material can be approved in some applications. It's competitive with cotton because it doesn't need all the water to grow. We have mats for the forks and spoons so there's zero concern for us. The alternative is acetate sheet that is FDA approved for food contact. But it is not tear resistance and not heat resistance.The thickness is about a piece of normal paper. It can easily be cut to size with a scissor, but not a paper cutter. So you need not worry about damage by forks and knives. They may make a dent but no holes. The dents may be healed by a hairdryer but I don't worry about that.My other uses for the rest of the roll. Obviously, it makes good drawer liners. If there is a reasonable fit, it's pretty hard to lift the liner up. I cut the sheets with scissors by hand and get reasonable "straight" lines to fit the bottom.Update 11/2020 - Amazingly, it still looks like that. It's still in one piece. The edges and corners are intact. There are fine swirl marks due to daily use but you have to get close to see it. There are also one or two slight dish impressions and distortion when dishes are accidentally put on the table straight from the oven. But you can see a vague circle, and the sheet is still pretty flat around it. I must confest I haven't washed the table cloth under since!

This polyester makes perfectly clear double interior storm windows, which save us about 50% on our heating. They last 35 years, and help both our house and camper stay nice and warm inside. Two 3mil 40" x 50' rolls were enough to build double window inserts for our whole house, and this is the best price I've found anywhere.Either build 1x2 wood frames and use double stick tape to attach the polyester film on both sides, with open cell foam weatherstrip around the outside to make a compression fit into the window sill, or tape it directly to a non-opening window frame, as long as you have at least a 1/4" air space, or better yet 1/2" to 3/4". See my 12 minute video on HartzHomestead for all the details.

Seems to work pretty good. I tried plain acetate and the watercolor just ran off it. Takes a few seconds for it to stick on these. Laying watercolor painting down flat on a table and then putting this sheet on top - gives me a chance to paint possible corrections to see if they work -- before I paint on the watercolor ... and ruin it. This will be a very helpful tool in my studio. You can paint on both sides of it -- and when finished, use a damp cloth to wipe off. Phtalo colors will stain it - so avoid those.

After doing much research and getting the wrong materials more than once and wasting so much money on products that didn’t work I finally landed on the perfect product for my hand drawn screen print transparencies. It’s literally PERFECT and the quality is absolutely flawless. The only thing is that it was really pricey 😰 I’m sure it’ll be worth it though :) hope this product is here forever.

I love this paper… I use colored pencils on it when I’m at the beach or just outside.

This good for transferring patterns to leather and most likely many other uses.