ANYCUBIC 3D Printer Resin 2.0, 405nm Plant-Based Rapid Resin 2.0, Low Odor, Photopolymer Resin for LCD 3D Printing,1kg Grey

I was about to get kicked out of the house due to the smell of typical 3D printing resin. This one is not odorless, but the smell is only a small fraction of the other resins. It also isn't quite so sticky when you get some on a tool handle or your hands (yes, I wear gloves, but I'm not perfect).For the Mars 2 Pro printer I did some tests and found that 3.5 second exposures (45 seconds for the first layers) worked well. Your preferences may vary depending on what you make, but that would be a good starting point. For other printers the numbers could be very different, because each has different UV intensity.I have been printing airfoil cross sections, 113 mm chord by 145 mm wide. The pieces are hollow, with a wall thin enough that it flexes in your fingers. You can seem some flaws in the photo, but most or all are because the FEP film in the machine has damage from previous projects. Once I replace that, results should be excellent. I had a 500 g bottle, and just ordered another 1 kg.

I use this for all of my miniatures that I 3d print. Good detail, each bottle has a little different perfect Cure time, so want to do a test, (I prefer Puck the Adventurers Tester). But if cure time is right and clean vat Prints turn out awesome time and time again. Smells, a little but not bad. Color is Grey but I always prime and paint my miniatures anyway. Cheaper then most price wise and looks good and couldn't tell.

I ended up buying this stuff after accidentally making my apartment uninhabitable for a day by using "normal" resin. Good news is yes, it doesn't smell. I can now sit next to the printer and burn out my eyeballs with the UV instead of my lungs with the fumes. Now I should say it isn't 100% odorless but as far as I can tell you don't need a whole fume setup and a dedicated room for it it only gives you one big ol' whiff of chemical smell when you take off the cover after the resin has been in the vat for a bit like after a print but after that it quickly dissipates unlike the normal resin whos smell lingers for hours. As for quality I cant really see any difference from the regular resin so in my opinion the slightly higher cost is worth it if you don't wanna wear a gas mask every time you print something.

As a first time owner of a resin printer (Anycubic Photon Mono 4K), I am happy to say it was a painless transition from FDM printing and having a good resin, such as this, helps. I don't have experience with other resins, but this was recommended to me by a coworker who said he uses it for all his stuff he prints, so it's what I went with. I've only done about 3 prints as of writing this review, which I think should be pretty good for figuring out whether or not I will like it, and have to say, I'm completely amazed by the quality. Maybe it's just because all I've known is printing with filament and the difference is night and day.Either way, it prints good, and the printer itself did a good job. The pics I have provided are printed with this resin, but don't represent the true color of the resin since I've applied a light coat of primer since I plan on painting it. The actual color is a shade lighter than the primer.The print quality is still amazing with this resin and clean and cure was a snap with the Anycubic wash and cure station. 10 minute wash, 5 minute cure and print is great.

This resin will give you great detail with reduced odor (it still smells pretty bad) the biggest problem is how brittle it is. If you’re looking for resin that can withstand normal wear and tear, drilling or even an accidental drop to the floor I’d look elsewhere.

I use the eco line exclusively. I don't have ventilation in my workshop and instead rely on air purifiers. With the help of my printer air filters and an air purifier, there is no smell. I can't say the same for other resins. The print quality is great as well. I have no plans on moving away from the eco line. It can be brittle, but its not so much to be a deal breaker.

I like that I don't feel as anxious using this. The fumes are still noticeable, but not super bad I feel bad. The print quality is pretty nice, although I have had some tiny arrows shafts/bowstrings break while removing supports, but that's on me.There is some slight warping/shrinking on a few prints, but it's not noticeable on anything that's a standalone piece itself or parts that connect in spots that don't have to line up perfect. I had a few giant prints go through that require more lining up, but there's some gaps which I'm learning to fill with greenstuff/milliput.There's a bit of tackyness/stickyness after wash/dry/cure, but that's not gonna be a problem for me as I intend to paint the stuff I print.I much prefer the grey over the white of this.

Toxic? Probably. But the odor is subtly like mushrooms, and you only smell it when the hood is off. If you like mushrooms and don’t want to ruin your love for eating them, then skip out on it. Otherwise it’s good.