🚗 Light Up Your Drive with Style!
The Xprite 8Pcs Car RGB LED Strip Lights kit offers a comprehensive lighting solution for both the interior and exterior of your vehicle. Featuring high-intensity SMD 5050 RGB LED chips, this kit allows for vibrant, music-synced lighting controlled via Bluetooth, remote, or a control box. With a durable, waterproof design and easy installation, it’s perfect for any car, SUV, or truck looking to enhance its aesthetic appeal.
Brand | Xprite |
Color | 4PCS Interior + 4PCS Underglow Light |
Form Factor | Strip |
Recommended Uses For Product | Vehicle Interior, Vehicle Exterior |
Auto Part Position | Inside, Outside |
Included Components | 2 x 3ft strips, 2 x 4ft strips, 4 x 12in strips, 1 x remote control, 1 x In-line controller/sensor, 1 x cigarette adapter, and installation accessories |
Connectivity Technology | Bluetooth, RF, IR |
Special Feature | Waterproof |
Material | Rubber |
Water Resistance Level | Waterproof |
Remote Control Included? | Yes |
Number of Pieces | 8 |
Manufacturer | Xprite |
UPC | 710382793932 |
Item Weight | 2.55 pounds |
Package Dimensions | 11 x 10 x 2 inches |
Item model number | UGL-62713-G1 |
Manufacturer Part Number | UGL-62713-G1 |
Special Features | Waterproof |
Wattage | 24 watts |
D**Y
Great Product, Great Price, Hope they last forever!
I blindly ordered these off my mom's Prime account. They showed up on a Sunday at 2:30 which was incredible. After opening the box, I examined each of the cables and found a small tear in the rubber casing. This was the only bad thing I noticed, but it wasn't something a little electrical tape couldn't fix. I tested all the strips and each of the light settings. All were good and the music settings are fun. Putting these on a Jeep had it's pros and cons. Wiring it was easy because the drainage holes in the body allowed me to easily run the wires. It was difficult to find places for the front and rear LED strips because of the after market bumpers on my Jeep. My method was to use the 3M strips on the back of the LED strips to mount them to the driver and passenger sides. Of course I had to clean the the mud off the body first. Then, I used the given zip ties to mount the led strips to the insides of my steel bumpers. This was affective and it seems like it will hold. I tested the hold of the strips by going different speeds and driving on bumpy roads. The strips stayed in place. I'm not quite sure how long the 3M strips will hold. They seem like they will be okay for a year or so and then need a new adhesive. If the adhesive goes bad and the product is still in great condition at the time, I will most likely super glue them to where I have the mounted. Overall, a great addition to the Jeep. I can match my headlights with red underflow or mix and any color as I please. Turns even more heads than before.
C**N
Good Price and Good Quality
The media could not be loaded. I bought 2 of these, 1 for me and 1 for a friend. Both of them are treating us well. These are very bright and they don’t feel or look cheap at all especially for the price! They hold up well for underbody washes in the car wash. It took a while to wire it up completely because all I used was a few zip ties where I could and mostly glue under my car. My small 4 door Camry was long enough to require a few feet of splicing for the rear LED bar, so I urge everyone reading this to get the 6 ft extension to be safe! I’ve never ran into any problems with these whatsoever, but I live in a small agricultural town so lots of mud cakes itself on the underside of the vehicle. I’ve just been wiping all 4 bars with a wet rag and the dirt comes right off. Hopefully they don’t get damaged from all the debris, if they do I will report back! The remote is very nice. You can change the brightness or speed if you’re on a mode. These things are great and the bars stick well to a smooth surface. 10/10 would recommend!!
A**A
Cheap but good.
Let me make this perfectly clear, These are a pain in the a** to install. They come with no method of installing the bars and unless you want to do some crazy wiring you will have wires everywhere. Other negatives are they have no way of daisy chaining the bars so unless you want to put the box in the middle of the car you will have to extend the wires. The remote sucks, it has a horrible range and it is made of cheap plastic so if it does break your screwed because you have no way of hard wiring even an on/of switch. I actually ended up just soldering the 2 antennas together. So why was my rating so high? The wires are made of copper so making adjustments to them is fairly easy even if you don't know how to solder. The bars them selves work well and are quite robust. The remote does work and because I mounted it and the power box inside the car it has a lot less chance of breaking. Even though it took a long time to install and everything other than the bars appears to be cheap they work quite well as long as you are quite careful to do a good job installing them. And the best part about these and the main reason they get 5 stars is that they are very cheap.
K**E
It's okay
The lights are absolutely amazing whatever color you choose in this product. As for the mounting adhesive it's all right it's not super super heavy duty but it does its job. The installation was okay but once again it was the adhesive that made the installation okay cuz the adhesive was not of good quality. The value for your money you'd be kind of better off spending a little bit more and buying your own adhesive that would be made for vehicles.
A**R
Horrible quality. First of all
Horrible quality. First of all, the instructions mention hooking two wires to the battery, but there are three wires (two which are red). What are you supposed to do with the third one? Whoever wrote this does not have a clear understanding of English, grammar, and technical writing.Another thing, the lines are not long enough to reach both, the front or rear end of the car, depending on where you will mount this. I have seen videos of people having to solder extensions, but I didn’t want to go that rout and figured I would check my local electronics store to see if any extensions were available, there were not. I will have to find a solution to overcome this which means poor engineering.Next, upon testing, I noticed one of the LED strips would not light up unless I twisted the wires at a certain angle, which indicates a short circuit. I then decided to open it up because I am a qualified technician, I immediately notice solder overrun on one of the contacts, touching the contact next to it, and also one of the wires is broken. This means poor quality.I do not trust this equipment will last long, given all the problems I have encountered thus far. And even though I will fix this stuff to my satisfaction, it’s unlikely anyone else would want to go through all this trouble. So yeah, it’s a cheap item, and I suppose, you get what you pay for. With that said, BUYER BEWARE.Lastly, it’s a shame of what Amazon is becoming. It’s becoming a hub for, likely, foreign products with no regard to quality. Yes, the prices are low, but at what cost??Stay away from this kit.
P**E
Satisfied
Nicer than expected app works microphone works both on the lights controller and on Bluetooth to phones mic well worth the money but anything bigger then my little Toyota pickup would definitely want longer ones
E**Y
White isnt really white
Its durable, but i wish they would mention you should wire the box part from the inside out cause if not youll b left with a box thats not weather proof on the outside of the car. Colors are nice, except the white. Its not really white its like a light blue sadly.
T**V
Great product
Great for the price, pretty easy to install with some wiring knowledge, would recomened getting extra zip ties.The app doesn't seem to want to stay connected.
S**A
Simple install and *mostly* came with everything needed
Brightness is decent and the remote control has a good range to the control box I have the control box hidden in a compartment in the trunk where the 12v outlet is, however, the remote is still able to talk to it from the front seat.The 12v cigarette lighter adapter made the installation quite simple requiring no special wiring. While the included extender harness for the strip furthest from the control box likely would be enough for a smaller car, it was quite tight for me and meant I wouldn't easily b able to take off the front bumper. I was able to find an extender harness fairly inexpensively and now the wiring is very neatly managed.I read many reviews saying the adhesion wore off in a few months so I used zipties every foot.I did notice some condensation inside the front strip after a few days however it hasn't influenced functionality yet.
K**A
Great product and beat customer support team!!!
I bought product and came with a defect, i emailed the seller’s support online and i receive a quick response and super fast action. I am so impressed with how they handle problems like this and makes a customer happy. Im definitely and vouch for this seller as they have a great support team. Great product plus one of the best customer service, what more can you ask for…
H**T
Not good
I got them and they lasted 4 months not worth it they looked good when they worked but they are not working so that’s why my review is 1 star.hello I am editing this coustmer services was great and sent me new pair
E**T
easy to install, rugged construction, I love this kit!
I installed it under my mazda miata 97, it looks AWESOME and cool, lights are control with the remote, you have a plug that goers direct in the cigarette lighter...!(or you can connect direct into your electrical system no fuss! (I like it so much I purchased a second kit for my model kits of Star Wars yo lite them up ;-) (even went overboard by installing it under the hood) Anyway, I think this is a great buy !
ترست بايلوت
منذ يوم واحد
منذ 3 أسابيع