PAR36 LED Xenon White 6000K(Eq 100W Incandescent Iamp) Multipurpose Tractor Light Farming Industrial Offroad Lamp Outdoor Incandescent Landscape Lighting(Flood-Pigtail Terminal)

Very pleased with the product and the seller (seller indicated as "HANDXEN" for this purchase).Received the order in just over two weeks, earlier than promised.Construction quality seems good and all holes/gaps are sealed with a flexible adhesive seal.My unit arrived with a very flexible 12" pigtail marked "<VDE> 2x0.5mm^2 300°C 3KV" - this corresponds to about 20AWG which is more than adequate for the 1 to 2A loads expected.Light output regulation is very good - no visible variation in brightness from 7.3V to 13.75V, which is the range I tested.Power is essentially constant at 14W across the voltage range I tested.Color temperature is ~6100K with reasonable consistency across the beam. CRI is 75.I don't have an integrating sphere, but it is quite bright. Easily over 1000lm.Great value for this item!

I used these led flood lights to replace the docking lights on my 1999 crownline 202 lpx, as it had conventional aircraft landing/ spot lights. The original lights worked good but as they are spot beam and the way were mounted in the boat they shined down into the water and really didn't do any good for docking unless straight on the dock and even then weren't that great. Also the fact these led replacements are low power to run my electrical system doesnt have the load it did like the original 55w ea bulbs. These led are quite bright they can been seen lighting up the beach when i installed them during the day. Cant wait to try at night. I attached a pic of led comparison to sealed beam.

Installed as docking lights on our crownline boat. No heat issues at all and provides great light when attempting to pull your boat on a trailer at night after having a "few".

These were a little bigger than the old ones I removed from my flood lights on my toy hauler. Luckily with some cutting and sealant they now fit like factory and they are 100 times brighter than the old incandescent bulbs. The old bulbs got so hot that it melted part of the housing. After having these on for over an hour I could still hold them in my hand without burning myself. Definitely worth the money.

Very bright, excellent value, I have ordered two so I could test them, liked so well that I ordered 13 more to complete the lighting on our rescue truck

We’ve used these and a similar spotlight version on tractors to replace old sealed beam type bulbs, much brighter, and lower amp draw. No real measure of how long they last, but I’ve had no issues. I run one on the rear of my pickup as an auxiliary/reverse light mounted in a utility/rubber mount. Definitely makes backing down a logging road or trail much better. Or in a parking lot.

These lights seem very well built. The clear lens is actually glass and not cheap plastic. The back is diecast aluminum. The wire coming out of the light is sufficient, but it is a very small diameter (22 gauge I think). These lights are very bright, as advertised, and they do an excellent job of illuminating the scenery around them. I highly recommend these!

SUPER bright and super quality! Hard to find a 4.5” LED Par 36 lamp. I wanted a 100watt headlamp for my chopper that wouldn’t draw too much current. Easy to install and draws less than 2 amps!