Will this power a 2500 watt amp?

I know this post is from 2 months ago. But you need to figure everything in RMS wattage. Not Peak. I have a SKAR 1200.1. 1200 watts RMS but it hits abt 2500 peak on the amp Dyno@1ohm. This kit is adequate for my setup. This kit is OFC. 2500 watts RMS no but if your amp is 2500 peak. Yes this is enough. Also depends if your amp is class B or a Class D amp. Class D Amps are abt 75% efficient Total RMS wattage divided by 0.75 then divided by 13.8 gives your total current draw of your amp. If you have a class A/B change that number to 0.50 and do the same calculation. A good rule of thumb. Take the fuse ratings on your amp and add them up. Multiply by 10 and that’s usually your real RMS not what is advertised on the amp. If it has no onboard fuse the owners manual will tell you the recommended fuse size and multiply that by 10. I’d say this 17 foot kit would be fine 1200-1500 Watts RMS. If it’s closer to 1500 watts just buy a 150 AMP fuse for this kit on amazon for 4-5$ and you should be good. Always rake distance into account too. 16-18ft of 4 gauge OFC is fine. But if you go over 18ft you need 2 gauge or 0 gauge.

Colour	Blue
Brand	Skar Audio
Material	Copper
Number of Cable Strands	1
Voltage	12 Volts (DC)
No. of wires	7
Manufacturer	Skar Audio
Global Trade Identification Number	00655036034736
UPC	655036034736
Model	SKAR8MANL-OFC
Model Name	SKAR8MANL-OFC
Product Dimensions	27.31 x 29.21 x 6.99 cm; 1.19 kg
Item model number	SKAR8MANL-OFC
Mounting Hardware	Skar Audio SKAR8MANL-OFC 8 Gauge Oxygen Free Copper Amplifier Wiring Kit
Number of items	1
Power Source	corded electric
Batteries Included	No
Batteries Required	No
Mounting Type	Surface Mount
Includes Rechargeable Battery	No
Country of Origin	USA
Item Weight	1 kg 190 g

Skar Audio 8 Gauge OFC Complete Amplifier Installation Wiring Kit, SKAR8MANL-OFC

التفاصيل

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة