4 inch diameter x 10 foot long Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

Used for leaf vac attachment. Great for being able to watch for pluggung through the clear hose.

I use a stock Harbor Freight Dust Collector in a two car garage. I will probably only upgrade the filter from bag to pleated. I shopped around for 4" flex hose and found these. Best price I found on Amazon or locally. I only used them for about a month now, but have had no issues. The wire is metal, so it can be grounded if needed and is durable. I would say something sharp could puncture the hose, but not easily. I have one connected to 6 in jointer, one on 13in planer and one on my table saw. I ran 4" PVC as close as I could to each machine to keep the flex hose short. You do loose suction with any flex hose due to the ribs.

How much can you say about a hose? It's seems very durable and sturdy. It's not light weight by any means, least not in my opinion, but I am not a hose expert. Comes packaged well and obviously easy to use.My wife got me a new dust collector for christmas, so I am in need of new hose. This fits the bill perfectly.Some one else mentioned it was light weight and collapsed, I have not found that to be true for me. Hooked it up directly to my 2HP collector and the other end of my planer, worked without a hitch. Great suction and did not collapse at all, well besides the normal under suction slight compression. Was pretty much no dust on my planer, so I am loving this hose. So much better than my shop vac system.Not saying it is the best, but very happy I bought it and would recommend.

If you happen to have a newer DC like the Oneida Super Cell, I personally WOULD NOT recommend this hose as the primary DC hose. Bite the bullet and use the very expensive Super Cell High Pressure Flexible hose that Oneida sells as your primary line. That said, I used a 10' section of this pipe AT THE END of a connection made up of the Super Cell High Pressure hose where I wanted to be able to hook up different machines with a DC quick connect fitting on the end of this piece of hose and that works just fine. This hose does collapse a little bit (due to the HIGH suction of the Oneida Super Cell), but again, it's at the end of the DC line, so that's OK. Also, being much lighter than the Super Cell High Pressure hose it's ideal for moving around to different machines. T

The media could not be loaded. The hose on my chipper/shredder's vacuum kit (Amazon# B01ITWN6CY <https://www.amazon.com/gp/product/B01ITWN6CY/>) is stiff and tough to direct, mostly due to the heavy-gauge wire coil around the hose. However, that does little if anything for hose longevity, which is poor: in a season or so of use it may split several times, requiring duct-tape repair each time, with each repair making the hose even stiffer. So I went in search of a better 4"x10' hose, and narrowed it down to two: this one (Peachtree Woodworking PW6168) and Amazon# B0013EOTRW (Peachtree Woodworking PW375).From the descriptions, there's no way to choose between them: they appear to be from the same manufacturer, same seller, with no distinguishing data -- and they are even the same price. Fortunately, that price is low enough that I could buy both for the price of replacing my current heavy hose -- and that way would know the difference -- so I did, and two boxes arrived:(1) One labelled " Clear-Vue 375 4"x10' Clear PVC Hose", Bar Code: X001TG7K9T;(2) One labelled "Ultra-Flex 6168 4"x10' Clear PVC Hose", Bar Code: X0019C12E7.So far, so good ... except that BOTH boxes have the SAME label on a side panel:"Fulton Woodworking Tools and AccessoriesUltra-Flex Clear Vue PVC Hose"In other words, the hose is both "Ultra-Flex (like PW6168) and "Clear-Vue (like PW375). So what is in the boxes? -- the SAME hose! The two hoses are IDENTICAL!But it gets weirder: The return address on one of the shipping labels (for PW6186) says "Peachtree Woodworking Supply Inc, 172 Trade Street, Lexington KY 40511". (The shipping label for PW375 has no return address.) But Peachtree Woodworking is in Peachtree Corners, GA, a suburb of Atlanta -- while "172 Trade Street, Lexington KY" is *NOT* Peachtree Woodworking, but an Amazon fulfillment center.(!)So: why take a hose described by the manufacturer as "Ultra-Flex Clear Vue PVC Hose" and give it two labels -- "Ultra-Flex PVC Hose" and "Clear-Vue PVC Hose" -- as if it were two different products? Why sell them on Amazon as two different products? I smell a rat, but can't see who profits from this nonsense -- certainly not customers. [Maybe the idea is just to sell more product -- to people (like me) who can't tell the difference, so get both.] It's all very weird.But the hoses are not bad: the 0.5mm PVC seems tough enough to do the job for my chipper-shredder, and the much lighter reinforcing wire makes the hose more flexible to use. That will make it easier to work with, and may even promote hose longevity. (If I learn anything significant in that regard, I will be back to update this review.)

I can see the dust flowing through the hose.

This was bought for my ferrets and they love it! If you have a small animal that lives tubes-get this one!

the hose was heavy duty yet very flexible. It fit perfectly on my 4 inch connectors. While the hose is clear, after several uses, the dust clings to the sides and makes it difficult to see into the hose, so while it is clear, don't expect to see through it. Great value for this hose and I would purchase this again.