XpelairDX100T 4" (100mm) Bathroom Extractor Fan with Window or Wall Kit Timer Delay Operation

Replaced this like for like, took 10 mins to fit, does what it says on the tin and not too noisy

So my fan broke in my bathroom and I was annoyed I would probably have to pay a lot of money to get it fixed. However, I looked on amazon and I found the exact same fan and a fraction of the price. When it arrived I was expecting a knock off box but instead it was the real item with all the additions provided.In the box you get the plastic cylinder to connect to the outside, the sticky backed fabric that seals around the fan, all the pieces you need to fix it, including screws. Once fitted it works perfectly, not very silent, but I never leave it on when I'm going to bed so this never bothers me. I live in a bathroom that does not have a window, so I leave this fan on for hours at a time after I shower to remove the steam. It does this perfectly with no malfunctions even after being on for hours.Overall great product, great price when I bought it, definitely recommend buying.

Purchased for use as a replacement window fan, but NOT SUITABLE AS A REPLACEMENT IN A 4” APERTURE. Because of the fixing arrangements an aperture larger than 4” is required. I had the option of returning the fan, fitting a new pane with the larger aperture, but decided to carefully grind four gaps to accommodate the screws and locating lugs out of the circumference of the aperture using a stone on a Dremmel type drill - took about 2 hours. As a window fan it requires the fan spigot to be cut back, also a second person on the outside to hold the flap fitting while inserting the screws from the inside. Not very convenient if you are in a tenth floor flat. Once installed and switched on without the inner cover, the fan blade was jammed - sorted by relaxing one of the fixing screws. After clipping on the cover, the fan was jammed again - sorted by relaxing both fixing screws. Now running quietly.This is low cost fan kit is supplied for wall, ceiling or window mounting. Other than the widow aperture problem above, that perhaps should be made clear, it is good value.

I got this to replace a DX100 that had died.Just a direct swap.Arrived quickly, but box not sealed, which I was wary about, but all the bits were inside.After fitting, worked straight away.Ensure you follow electrical instructions to avoid injury.

Bought to replace a fan our builders fitted a couple of years ago which died last week. The old fan made a racket, so much so that we could hear it all over the house. I was 'getting around' to fitting a new (hopefully quieter) fab, but it never made it to the top of my list. So when the old fan died, I was quite pleased.Fitting was a doddle. Our builders had siliconed the last one to the tile wall, it never fell off, so I decided to do the same with this one. That meant i didn't have to drill holes. I used the same wires as the builder had used (making a note of which colours went to which terminals). When I switched it on, was very happy. Its so much quieter.Its not silent, but i cant hear it from the landing when the bathroom door is closed - so that's good enough for me. If you're looking for silence, and you're starting from scratch, you might want to consider an inline fan. For me that wasn't practical as the hole and wiring was already there. If you're looking to simply replace an existing fan, you cant go wrong with this one.

There was one already in place but had burnt out so I ordered one and it took me 15 minutes to fit well made item and comes with other fixing bits ie to a window

The fan was purchased to replace a failed fan so the tubing and external fan were not required. The fan was relatively simple to install and connect. However, within 2 days of installation it was necessary to remove it temporarily to reconnect the fan blade which had become detached. Simple enough but I sincerely hope it isn’t going to be a regular occurrence. Fortunately it does have a 2 year warranty

A super extractor unit, quiet and efficient. If only the fitting instructions had been equally as good. They were very difficult to follow and mixed up fittinginstructions for walls windows, ceilings and panels. The pack contained components for all the different fitting options. A sheet clearly identifying all the components and specific uses would have been great. Having said that, once I had wortked out how to fit the item, it was realy very simle and I am delighted with the product