BLACK+DECKER Multievo Multi-tool Impact Driver Attachment, MTIM3-XJ

This is the drill attachment that should come as standard really. It's my go to attachment rather than the standard one, whether it's stirring paint or drilling far beyond it's rated capacity it never lets me down. Two stage gearbox combined with the variable speed from the motor gives very fine precision. Brilliant piece of kit.Edit three years on and still going strong!Edit, nearly 6 years on and still going! Had to use it to drive some big screws into fence posts when I forgot the impact driver attachment, loaded the drill to the max and no problem.I still think that it should come as standard!Today it finally met its match, trying to drill into a solid concrete slab in order to sink some 6inch concrete bolts to hold a post foot. To be fair this really was the domain for a mains powered sds drill, that said this attachment did better than my baby bosch Pro 18v hammer drill and my friend's 18v Dewalt hammer drill. Combined with the 4ah battery this attachment got the deepest, blunting the drill bit and making the motor get red hot...... After 4 holes we decided the sds drill was really better for the job. But what a remarkable performance for a DIY rated tool!Update-Today I drilled 200 4cm wide, 20cm deep holes into my lawn under instruction..... The ground is compacted hard clay. This was 90 mins of constant work to the max, attachment got too hot to touch but finished the job easy!

Very fast delivery and well packaged. Comes with extra fitments which i wasn't expecting, so you can get started straight away! It came with an assortment of wood/metal/plastic cutters and grouter, a sanding attachment and sanding paper of different grades. The instructions are easy to understand and the tool is very easy to change attachments. I have already bought other attachments before and with this multi tool you can saw and cut in harder to reach places than for example the jigsaw attachment. This is a very useful tool to add to your multi evo tool and I would recommend it!

I don't use this very often but it's a quick change accessory that does work well. If you have the drill you can't go without this.

Perfect fit and does the job fairly well.

Pretty good. Works as a clutch drill and hammer. 9 settings on the clutch plus a drill setting plus a hammer setting which engages the hammer. No hammer on the other settings.

Not used it yet, very niche but handy to have

It is as shown

This is probably the first additional tool head you should buy for your Multievo drill. It's built like a tank and makes any job where you need a drill and a driver much easier, as you can keep the drill and driver bits in their respective heads and swap between them as necessary without having to keep opening chucks and fiddling around changing bits out.