WORKPRO Cabinet Jack Support Pole, 54-114 Inches Steel Telescopic Quick Support Rod Adjustable 3rd Hand Support System with 154 lbs Capacity for Cabinet Jack, Drywall Jack& Cargo Bars, 2-Pack

These work great. You might need something with a higher load capacity but they worked great for me. The quick release is very quick. You might want something else to limit the retraction distance because these will fully retract when released. Nice carrying bag to store them.

These cabinet jacks are life savers.Easy to use,sturdy,well made and they come with a carring bag.Glad i purchased as they will be used often.

these supports are the best --easy to set and a very high quality product.

Relatively easy to use. The pads at the top and bottom work well. I used to erect a plastic screen during construction. Not sure the bag is necessary, but should keep them less dusty during storage.

I'm using mine to support the middle of a looooooong wood closet shelf with a lot of heavy things on it AND an associated very long closet clothes hanger rod/pipe that was bowing in the middle from the weight. The 3/4" wood shelf is supported on the ends and back against the wall, but with all that length the front had bent down nearly 2 inches over the years with all that weight. I could see that at some point in the future it would dump unless something was done. The closet rod/pipe was bowed about 1 inch in the middle from a huge amount of clothes hanging on it. I put one of these under the shelf and raised it about an inch to start, then left it for a week to allow the bowed wood to adjust and not split on me. This jack held perfectly the whole week. Then I raised the shelf another inch where it still is, nearly level. Wonderful! I know the ultimate solution is a mid-shelf metal brace against the wall into a stud that I would have to find (not easy, tongue and groove board on the wall, stud finders don't work, too deep), but I don't have time for that now! These lifts are the perfect solution until then. Same with the closet rod. I put one of these in the middle and cranked it up until the rod was nearly level. Problems solved!! I bought the shorter version of these too that I plan to use for what they are really designed for, holding up a new bathroom cabinet in place while I screw it down, replacing an old existing one. That job would be hard to do with just 1 person without a lift like this to hold the cabinet in place. Even with two people the cabinet is heavy enough it would be difficult without a lift.

What a pleasant surprise. This is actually made very well and can definitely handle the 154 lb load per unit.Since the base and the top swivel, you either need to stabilize the load or use one of your hands. I used them to install cabinets above a desk alone, so once I had everything level and where I wanted, I used on hand to make sure it didn't kick out from the wall and the other to secure the cabinets.

Fast shipping and product really comes in handy.

These stands are durable, easy to use, and worked great for supporting the cabinets while we screwed them in to the wall. They are sturdy and not to heavy as I don't think you would want something flimsy holding something up you are working under. :-) Worth the money, good value.