Boterm GTA 0.8kg Extra Strong Shoe Repair Glue Contact Adhesive Leather & Rubber

Use google translate for instructions and you will be good to go.Excellent strengh of adhiesion. Must use in well ventilated area or outside. I have used this glue to apply 5mm sole bend hide to a steel axe tang. Works great if instructions are followed...and use latex gloves. Brilliant packaging good size will last a long time be sure to seal lid properly. It will not dry clear so be warned. Its certenly a professional product and will save you lots of money in repairs.

Good quality but not excellent

I use Bochem adhesive to make leather wallets and watch straps, it gives great results while remaining flexible.Highly recommended.

Big jar full of fine adhesive. Fast delivery. Long drying time. Comes with instructions for shoe sole repair.

Didn’t work at all despite me following the instructions. Lasted about one week until the soles started coming off again, and now there’s a visible residue left from the glue as well

You need to follow the instructions particularly time, heat and multiple applications. If you do that you should have great results. I used it in order to replace all the leather cloth in my 1970's sportscar with real leather. When I started the project I intended to do just the dash, but that went so well (which gave me confidence) I did the doors, and ended up purchasing a leather sewing machine to do the whole vehicle.

This glue is superb but you must use as instructed. IE. Temperature. Wait time etc. I repair my walking boots with this and really sticks

Good value at around £14/tin. Made in Poland but English instructions on accompanying paper sheet - indispensable !Be sure to thoroughly clean, degrease and rough-up surfaces to be joined & leave for the full 3 days to cure, otherwise it will not be able to bond fully. So be patient. Ventilate area well or use outdoors - NO SMOKING , especially, or heaters as the hot fumes are extra toxic. Clean application tools by soaking In nearly boiling water till hardened glue softens, rolls off clean in a rubbery ball using fingers. If the lid gets stuck on, place a boiling hot wet face-cloth over the top for a 2-3 minutes - should soften enough to lever open. Would recommend.