PEMENOL20W Voice Playback Module, DC 6-35V Sound Board USB Downloadable Music Player 24-bit DAC Output MP3 WAV Support TF Card 32GB Max for Broadcast Device DIY

PEMENOL20W Voice Playback Module, DC 6-35V Sound Board USB Downloadable Music Player 24-bit DAC Output MP3 WAV Support TF Card 32GB Max for Broadcast Device DIY

Q: What is the current draw on this device, at say 12V max volume both channels?

The operating current changes as the music is played, and the volume has a big impact. The maximum is about 100mA

Q: Sound files on this chip are triggered by connecting gnd to one of the #d holes. is it safe to leave this wire connected permanently for loop play?

The spec sheet doesn't say whether it is safe to do this or not. I would monitor the setup for a while to ensure there are no overheating problems.

Q: Can this device be set in continuous playback mode. And how simply do you do that?

Yes. Set the device into IO Independent mode 0 or 1 using the red DIP switches. Load your mp3 or wav file onto a TF ( micro SD ) card and name it 1.mp3 or 1.wav. Insert the TF card, power up the device, and connect IO pin 0 to ground. File 1.mp3 or 1.wav will play until IO Pin 0 is removed from ground. If you set the device to Independent Mode 0, the device will continue playing the current song to the end of the file after releasing IO Pin 0 from ground. If you set the device to Independent Mode 1, it will stop playing immediately after the releasing IO Pin 0 from ground. Hold IO Pin 0 to ground for continuous playback of song "1". Google for the DY-HV20T manual for technical details. Good luck!

Q: How so I wire a switch?

If you look on the amazon listing. It shows 8 switch connection points that you can individually connect to the ground connection to play 8 different sounds. They need to be saved and downloaded with the 8 proper names in order to work. Just a tip, to get good sound out you need to connect to computer speakers.

4.3/5

معرّف المنتج: 568163109

معاملة آمنة

التفاصيل

Compatible devices
Personal
Brand
PEMENOL
Hardware interface
USB
Microphone form factor
Built-In
Format
MP3 Audio WAV

🎶Supports MP3/WAV

💾32GB TF Card

🔊20W Amplifier

يُشترى معًا بشكل متكرر

20W Voice Playback Module, PEMENOL DC 6-35V Sound Board USB Downloadable Music Player 24-bit DAC Output MP3 WAV Support TF Card 32GB Max for Broadcast Device Easter Present DIY

Gikfun 2" 4Ohm 3W Full Range Audio Speaker Stereo Woofer Loudspeaker for Arduino (Pack of 2pcs) EK1725

GRS 3FR-4 Full Range 3" Speaker Driver 4 Ohm

الوصف

🎵 Elevate Your Sound Game!

🔧 DIY INTEGRATION - Seamlessly integrate into your projects with programmable control options.
🔊 ADJUSTABLE VOLUME - Customize your listening experience with a built-in volume potentiometer.
💾 EASY MUSIC MANAGEMENT - Store and update your favorite tracks effortlessly via USB.
🔊 POWERFUL SOUND OUTPUT - Experience rich audio with a built-in 20W Class D amplifier.
🎤 VERSATILE CONTROL MODES - Choose from 7 control modes for ultimate flexibility.

The PEMENOL 20W Voice Playback Module is a versatile sound board designed for DIY enthusiasts and professionals alike. It supports a wide range of audio formats, features a powerful 20W amplifier, and allows for easy music file management with a 32GB TF card slot and USB connectivity. With multiple control modes and adjustable volume, this module is perfect for integrating into various broadcast devices and projects.