Does this eliminate sunlight from entering a bedroom through a vent?

I think it should do. We used it on a vent from an extractor fan which used to fill with water when the wind blew the rain against the outside wall. For your application it may let a bit of light in from underneath but the vanes on the outside of the vent will most likely be angled downwards so it should be minimal if any at all.

Is this a single unit or can you fix the outer part around the airbrick & clip the cowl part in during bad weather?

Mine was one single moulding with holes for screws in each corner. Once it’s in place it’s fixed, I’m afraid. Actually I have used two over the years - both the same design. One to keep the weather out (around an airbrick) and one to reduce the rattling of the vent plates around an extractor fan outlet. I hope this helps.

the airbrick in my lounge measures 8.5" X 5.5". Is this 9" X 6" vent the right size?

Assuming the outside dimensions are the same, then it should be ok. When I fitted mine it was tight-the screw holes in the vent were right up against the edge of the air brick but as long as you are careful with the drill all will be well.

Brand	Timloc
Model Number	hsmart-440
Package Dimensions	25.4 x 21.9 x 6.6 cm; 90 g
Material	Terracotta
Special Features	UVProtection
Item Weight	90 g

Timloc

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة