ZB-L100K Handheld LCR Test Clip Universal Digital Bridge Kelvin Test Line SMD Chip use for DE-5000 LCR Meter

Works great with DER-5000. Build quality is better than expected, and also good deal. Highly Recommended.

Use caution when inserting into your meter as the pcb terminals are pretty thick. They were much thicker than the fixtures that came with my DE-5000 LCR and bent one of the terminals the first time I used it. After fixing my meter, I filed a taper on the pcb terminals and the fits is much nicer now. Probes themselves seem to be of decent quality and work well. Put a finished edge on the pcb terminal connection (similar to a PC card), and 5 stars all day long.

I found it to be well made, true Kelvin clips. The part that plugs into the LCR meter has two sides to each tong that are insulated in the middle of each tong, and appropriately wired to the clips. Works perfectly with my ZOYI ZT-DQ02 so indeed will also work with the ZT-DQ01. I can easily recommend this product 👍

Got this today. Opened and plugged it into my B&K 879B meter. Worked perfectly. Others have said to taper the 3 connectors on other similar test instruments. Pushed in gently multiple times, no problem. Open and shorted calibration passed no problem out of the boxRecommended.GP

Great pair of kelvin clips for my DE-5000 LCR meter. Early on I had made one but this is much better. Checked it against my make and the results for measuring small resistances are very close to each other. Also claims to be compatible with most LCR meters. Good value.

Well. It does not fit the de-5000 out of the box.If you force it to plug in you WILL bend the tab clasps and the unit will not work any longer.If you look at the edges of the connectors that came with the unit. The edges have been filed to a point. To insert between the connectors. You must file the edges similarly on the new units. They will work fine. Note. The direction it is plugged in matters. The cable should be to the left.

Purchased for DE-5000 LCR meter. Good build quality. Only deficit is, as noted by others, plug blades are square sided and difficult to insert into meter. However, a couple of minutes of gentle filing with a fine tooth metal file rounded the blade metal and separator board and it inserts easily and smoothly now.Will update with testing results beyond initial calibration with the meter. So far, with that one caveat, I'd recommend these leads.

Not too much to say about this other than it's well made and works with my LCR multi-meter. Connector not terribly long so you have to position the work piece somewhat close, but you'd want to do that anyway. The clips feel good in the hand and have sufficient spring force to hold securely. All-in-all I'm happy with these and don't have any problem recommending them to anyone looking for a decent set of Kelvin clips.