Super Slick 2000 Epoxy Bottom Coating for Airboats, Jet Ski's, etc.: Gallon Kit

I used this on my pontoon boat in the ceramic river to keep the algae off the bottom of the toons works great boat picked up over 5 mph compared to a dirty bottom

This stuff is super slick, it’s kind of messy. I rolled the 1st coat and brushed the final coat. Rolling didn’t get it very thick. I had enough in the kit to do the bottom of my boat and the transom. I sanded the bottom, etched with alumibrite, painted with BLP MoPoxy, sanded the paint, rolled on 1 coat of super slick, let dry for 3 days, sanded the super slick with 180grit, and brushed on the second coat.

This stuff is amazing. I bought the 1 gallon kit and was able to do two boats. One was a 18’ duck boat and the other was a 16’ bass boat. This stuff makes launching super easy. The boat will slide off the trailer if you’re not careful. We run our duck boat in the mud and beach it all the time and this stuff holds up.My bass 16’ aluminum bass boat has some electrolysis on the hull and leaks a little, after two coats it doesnt leak any more and is super easy to clean scum off the hull. Both boats took two coats. One was a painted hull and the other was bare aluminum. We sanded both hulls and cleaned with acetone and had no issues. I recommend mixing a quart per coat. Use a good solid foam roller that won’t come apart this stuff I thick and sticky and will pull apart cheap rollers and you won’t get a smooth finish.

Got the product quickly. I pulled the mud motor off the boat flipped it upside down. We followed the instructions on the product and proceeded to apply it. The working time is great. We poured it and spread it with a roller which worked great. 1st coat was fairly thin. The 2nd coat was thicker and finished off really well. This one gallon kit did our 16 48 boat and my buddys 14 36 boat. Mine is a 16/48 with a 35hp go devil. We took the boat out and the difference is night and day. This stuff is awesome. After you apply it keep the boat hooked till it’s in the water or it WILL slide off the trailer. My 12 year ol pulled the boat up on the trailer by hand when we got back. Very impressed with this stuff!!!!!!!

Absolutely great product. I used it on my 1750 John Boat any other boats I get a hold of I’ll be using the same product.

The out come of this product exceeded my expectations. It sealed all the rivets and made the bottom super slick I guess that the correct name to call it. 1gal will coat the entire bottom and both sides up to the middle rib on a 1656. I started to use a tray and a roller then ended up just pouring it on using the roller to main push it around to coat everything.The only complaint I had was the parts you add the color to was clumpy and took forever to get the clumps out. This being my first time using this product and applying it I would totally recommend it.

This stuff is slick!!! Had a few questions called the number on the jug and Faso customer service was great!I accidentally bought the gallon kit, I only used a little over 1 quart for two coats. If I was going to do it again I would buy the quarts cause the gallon gets a little messy when mixing up smaller batches.This stuff works fast, so once you mix it you have to apply all of it quickly. Mine was dry to the touch in about 4 hours from application in 80-90* weather. I would t apply it in the sun a shaded area is best.