LEE PRECISION 90860, Carbide Factory Crimp Die, 9mm Luger

Works great. Item is as described.

I don't like to use the word 'brilliant' very often, but this die is brilliantly designed. It's a very simple install; just screw the die body into the tool head until it touches the shell plate with the ram in the up position, run the adjustment nut out most of the way, then put a loaded cartridge that needs crimping into the ram and run it into the die at the top of the stroke and screw down the adjustment nut until it just touches the cartridge, back out the cartridge and tighten the nut one full turn for a solid factory crimp! The instructions say a 1/2 turn, but you really need a full turn, no more, no less. It makes the most consistent and perfect crimp on every case which then gauges and chambers perfectly. The problem with the Dillon die is that it will cause a case bulge if it's screwed down even a little too far and is much more difficult to adjust. When I go to reload 40 S&W, 10mm, and 45 ACP, I'm going to use this as my crimping die! There was no issue with the quality of the machining of the parts of the die--like other reviewers had mentioned, mine had mirror surfaces on all the contact areas!

Works perfectly and will buy more of this brand.

I have been reloading for more than ten years and while I have other brands of reloading dies, LEE products have always produced very accurate rounds at a very good price. The bottom line is the finished product, accuracy, ease of use, and repeatability at the lowest possible price.

LEE dies are always quality, and this one was no different. It was all I expected it to be, and the shipping was quick.

This die puts the finishing touch needed for consistent loading and firing. With just the bullet set & crimp die, 10-15 % of the rounds wouldn’t fit right. The factory crimp is a must. Down to less than 5% that fail to gauge - mostly due to bad brass.

This sizer works very well and has tremendous adjustability. BUT, Lee says it won't move and goes so far as saying it can't move but! it does.The sizer has a lock ring for the die but not for the adjuster all it has is an "O-ring to hold the adjustment.I set the die up and then scribed a locator line on the top of the adjuster. Using a medium crimp I sized 200 rounds of 9mm and the adjuster did move about an 1/16 inch. Not real bad but I wonder?My fix was to set it where I wanted and put a small amount of medium Loctite around the top of the sizer threads and this seems to working so far.

Almost all my reloading equipment are Lee ,I do have some RCBS does and Lyman powder scale .. that’s 40 years old .Will buy for Lee when items are needed

Good quality die

Buono

Envío rápido y en perfectas condiciones.Usado en una Dillon 750XL y en una prensa monoestacion Lee con idéntico resultado.Conseguido un buen acabado. No es de obligado uso pero facilita el montaje.

Funktion echt Super

Spot on. Was worried it would factory post size but doesn't. Really good product. Love using it.