Logitech G502 Laser Mouse Feet - 2 Sets of Mouse Skatez / Feet

Easy to put on

Applied to my G502 Proteus Spectrum. Amazing! My mouse is now 6.5 years old (testament to logitechs previous build quality) and the mouse feet were worn as you can imagine. I game for about 2h a day, as well as using the mouse for work.The feet gave my mouse a new breathe of life! It glides properly now and I'm no longer handicapped in games.To apply them, remove your old pads and clean the housings thoroughly. I used some of my own cleaning sprays, a microfibre cloth and a plastic scraper to scrape any sticky residue left over.Once you've done that, use the alcohol pad supplied to give them a final wipe.Take the new pad and hold it at the sides, peel off the thin film (important!!!), Then stick down into the mouse. They slide a bit before setting, so you have some leeway if you miss to slide them into place.I'm not sure how much longer my mouse will last, but you get spares too. Enough to replace all the feet on the outer parts and one section of the hexagon in the middle, where the laser pointer is. At the very least my mouse will get another set of feet in a few years, if it lasts long enough .Great for the price, get them and keep your mouse!

Only down side was that the kit didnt come with the alcohol wipes as pictured, aside form this the pads all fit perfectly on my G502 hero

Even though my G502 Mouse is only a few months old with approximately 6 hours of use daily the feet (pads) were worn and always felt like there was grit on my hard gaming mat which was seriously annoying. After tearing my hair out with frustration and almost throwing this expensive Mouse in the bin I decided to do some research and to my surprise I found out that the feet can be replaced. I found these on Amazon and after reading some reviews I purchased some. It’s a little bit fiddly to remove them but if you use a good pair of tweezers and take your time they come off pretty easily, then clean the surface with the supplied alcohol wipe to remove any trace of glue residue/dust etc, it’s just a matter of placing on the new feet which are a perfect fit. Take your time to align them before pressing down for them to bond in place, once you’ve fitted them all carefully pull the plastic protective cover off by the gentle use of a fingernail you’re done. My mouse is actually better than when it was new, so smooth and much more responsive. Well glad I got them and the bonus is I have another spare set should I need to replace these in the future?Excellent upgrade, well chuffed.

The Skates work well, I bought them for my lightspeed G502.However, through my own fault, because my mouse is the lightspeed (wireless) version of the G502 the Skates are slightly different.This makes it so that the top skate is a bit small for the light speed. (The biggest one)And the Nike tick looking one, that goes at the bottom of the mouse for the Lightspeed would be a full semi-circle.I can deal with the mistake I made, I just don't want others going into this buying it for their lightspeed, and being disappointed.

The pads on my logitech g502 started wearing and would make a scratching sound everytime i would move it but since removing the old one's and putting these on the mouse glides and is silent now, best part is it comes in a pair so if these ever fail i have another set ready to go

Pads are thinner than original and cause the mouse to drag, applying both sets solves the problem but defeats the points of having a spare set included. There is also a protective film that needs to be removed otherwise it will not glide smoothly even with both sets. This is not mentioned.

As the review says, they're a great pair of skates but please don't forget to remove the film attached.If it feels like the mouse has a lot of resistance, please check that first. After removing that, the mouse glides very easily noow.You get 2 replacements, so if you mess up applying it the first time (it's not hard to do, so unlikely) you get another chance.Mine also didn't come with the alcohol pads, but i had my own to clean up the leftover residue from where I removed the original skates.Another reviewer says something about using 3 hexagon pieces, but that's not needed. Just the top and the bottom work fine.Picture 1: Skates attached.Picture 2: Notice how the skate is more dull where the protective film isn't showing as much.

I bought these for my Logitech G502 which I have been using with the Logitech G440 Gaming Pad from day one. I found it very easy to remove the old feet and install the new ones using precision tweezers. Immediately upon first use I felt like I must've ruined my mouse somehow because the tracking was so off my first thought was "I'm going to have to find a spare mouse just to order a new mouse!" Then I remembered there was a clear film that was mentioned in other reviews that I hadn't removed yet; that still didn't fix the tracking and complete malfunction of this mouse. I tried restarting, unplugging, was clueless. Then, I decided to go into the Logitech software and change my mouse settings from using this hard gaming pad and the problem immediately corrected. For some reason, the mouse will not work when set to the hard gaming pad, which I am most definitely still using, but works just fine if I change the setting to soft pad or factory . So, be forewarned. The mouse is now more responsive and precise than I can ever remember it being.

These replacement G502 pads are amazing... the best 6 dollars I've ever spent.

replacement parts