TP-LinkTL-WPA4220 TKIT 2-Port Powerline Adapter Starter Kit, WiFi Extender Booster Trasfer Speeds up to 600Mbps, 2x Ethernet Ports, One-Touch Wi-Fi Configuration, Easy App Management

Why did you choose this product over others?:Not had this for one month yet, but so far, so good. I have tried a direct Ethernet cable to the hub and had slightly higher speeds, but in terms of practicality, this device does the job. It is very much faster the the old generation from 10 years ago. Having wifi also built into the remote endpoint does help with devices that require the lower 2.4 GHz range and has a split for 2.4 and 5 GHz so you can get the best out of Wifi equipment, like wifi light bulbs etc...The pass-through power point on the device is really helpful as I have limited sockets and need the device to be connected directly to the socket, not through a surge protector as per instructions...The only way to know how good the speed is will be to try the unit, as it is a case-by-case basis with a building's wiring and many other factors affecting it.Works for me.Wifi signal:Separate 2.4 GHz/5 GHz is useful, allowing 2.4 GHz only devices to connect without compromising on higher speeds for 5 GHz compatible devices.Speed:It can vary, however, my network is showing 543 Mbps on the tpPLC desktop app. The tpPLC app is what is needed to determine how the units are working on the mains wiring and for wifi configuration. The number fluctuates, but the connection has been good and working with games, downloads and streaming video. If I wanted to fully utilise a 1 Gbps connection, Ethernet direct link would be the only way, but for 100-120 Mbps internet, this device works well.Build quality:The device seems well constructed.Design:The design includes buttons for pairing on the mains between the hub-connected endpoint and the remote extension endpoint, making installation easier. There are clear instructions. It is best to check which button is which before plugging in the unit because it is harder to see once on the wall!Wireless connectivity:Again, having a separate 2.4 GHz is helpful as the hub I was connecting to did not have a feature to split this. Using this product has completely negated the 2.4 vs 5 GHz wifi issue.Gaming capability:Working fine with current ping (including ISP) at 13ms using an Ethernet cable connected to the device and stable data connection, and thus far no drop-outs.

We stream TV, game and video conference using these. Very easy to configure, just press the pair buttons; more detailed configuration (which many might not need and there is a detailed user manual you can download from tp-link) using the web interface is self explanatory but I have more IT experience than is typical; you should bear this in mind if you are less experienced. The web interface offers great flexibility, crucially it offers the all important MAC address white listing (I won't entertain any WiFi without this capability), for fun you can even schedule when the LEDs turn off at night which is actually useful in a bedroom. Find the web interface at the private IP address your broadband router assigns it, most likely starting '192.168', or download the tpPLC utility from tp-link and access your device's web interface via tpPLC by clicking on the little globe which pops out to the right of your device (give tpPLC a few minutes to sort itself out, then hover over your device and watch the globe pop out). Clicking the globe will open a browser at the appropriate IP address, the first time in you'll need to set a device access password (this isn't the SSID WiFi password). Each WiFi capable tp-link device will have a different IP address. The default device IP is provided by your router's DHCP server but you can statically configure. The TL-WPA8631P also provides a DHCP server with configurable address range (you can disable it). The WiFi has WPA/WPA2/WPA3 security, 3 power levels, a guest network off by default, parental controls for specified MACs, 2.4GHz and/or 5GHz can be switched off. There's facility to backup/restore settings, some settings can be synchronized (or not) across devices, you can list connected clients. I downloaded the user manual from tp-link to check it had the features I needed, it's comprehensive and runs to about 45 pages.My house has brick internal walls dating from mid 20th century and covers an area large enough to make WiFi difficult. The house wiring is approximately 15 years old, I have no ethernet cables between rooms, I rely on powerline data transmission using the house ring circuits. I find no problem running powerline devices on simple inexpensive extension leads (without power filtering) and somewhat surprisingly find these devices work between ring circuits; I don't understand why this is but it's likely because I don't understand my house wiring well enough (it was rewired before I moved in). The takeaway is that in my house the powerline works very well everywhere, even in the 'garden office' which has its own ring circuit and is 60ft from the house, but it might not follow you will get the same performance; from what I read your house electrical wiring is critical to your experience.I currently have four AV1000 (max 1000Mbps over powerline and with 1Gbps wired ethernet) and two AV1300 (max 1300Mbps over powerline with dual band wifi and 1Gbps wired ethernet). I downloaded the tpPLC utility from tp-link and run it on Windows 11; it shows the powerline speed being achieved between the various devices in my house is more or less half the max theoretical speed of the slowest device. Thus AV1300 to AV1300 is typically ~700Mbps, AV1300 to AV1000 is typically 400/500Mbps and AV1000 to AV1000 is also 400/500Mbps. The tpPLC utility shows these numbers vary over time over a small range. Whether these speeds are a realisable data rate for connected devices I don't know, I assume there are loses and actual connection speeds for equipment will be slower. The broadband speed to my house over fibre is 130Mbps. Speed tests from computers to the internet using ethernet cable connected to the 1Gbps ports show me achieving 120/134Mbps so powerline isn't causing a bottleneck and I'm seeing my full broadband speed. When I increase my broadband speed to 264Mbps it will be interesting to see if I see this greater speed over powerline. The AV1300 TL-WPA8631P offer 2.4GHz & 5GHz wifi. At 5Ghz I also achieve 120/134Mbps, at 2.4GHz this speed seems to drop sometimes to 100+Mbps; I was surprised by this because the TL-WPA8631P is rated at 300Mbps for the 2.4Ghz wifi. Otherwise horses for courses, 2.4GHz penetrates brick walls much better than the 5GHz and I switch off whichever wifi frequency works less well in the environment it is being used, typically using 5GHz only within a room and 2.4GHz between rooms through brick walls; it stops connected wireless devices sometimes choosing the less strong/fast signal; that's a typical wifi issue not limited to these devices. The wifi TL-WPA8631P have excellent configuration options when using their web interfaces, including MAC white listing which I use extensively, and one can restrict a MAC (eg a child's smartphone) so it can't access WiFi at night. Being able to restrict MACs on a school night is essential, they learn soon enough not to use up their 4G phone data. I have not tried using OneMesh, my broadband router doesn't support it and I don't find the need for Mesh WiFi. Rather than have all network names (SSID) the same and experience the commonplace wifi issue of a computer hanging on too long to a weak signal from a distant access point and not knowing which access point you are connected to, all SSID names are different and we know where we are connected; that is fine for us. If you walk around your house while in a video conference your mileage might be different and need Mesh wifi.Overall I have found these powerline devices amazing; for my purposes these devices beat dragging ethernet cables around the house. If you have Gigabit broadband and want to see it in distant parts of your property then wired ethernet might be the way to go (though I note powerline equipment with speeds faster than AV1300 are available which I have not tested) but for more modest speeds, like my 130Mbps broadband, and good house wiring, this might be all you need. I have not tried mixing different vendors, all our devices are tp-link. I've updated the firmware on both of the TL-WPA8631P, because it was there not because I needed to, I used the web interface but the downloaded tpPLC utility also has the facility to do this.

So this is my second kit, only because of an issue with the powerline unit but Amazon replaced it easily and quickly.Some things to consider, great speeds and easy set up, firmware upgrade not easy from a phone but simple enough, shame the app doesn't have its own upgrade utility built in, easy and simple to access Wi-Fi but still secure enough for home use.You can create guest Wi-Fi and use timed features for limiting time online too.Gets warm but not too hot, passthrough sockets good quailty.