ESUMIC LED Strip RGB 4 Pins Splitter Connector Cable White (1to2 splitter cable)

For one color LED you can use any wire you have laying around. RGB LED's are a lot more work. One end may be finished with a plug, the other end may be the one you cut. Finding a good small 4 wire you can attach usually requires a special order.Not with these... these pre-built extension cables make connecting two ends with connectors insanely easy. With this cable they presume you already have the 4 pin interconnect for the other side... so hopefully you did not lose the microscopic things! I usually try to get the next size beyond my estimate. This one went from over the cabinets... up a wall, through the attic and own on other side of a pass through into the kitchen. All was good.Very handy. I have used them a couple of times now.

I have a couple of these, I have LEDs in my camper that I put up on the awning and such so I am constantly taking them apart and packing this cable back up. It holds up well, but I have two minor complaints. 1 - the little arrow showing direction is hard to read and see especially at night I wish the connectors simply only worked one direction. but is what it is. 2 - the little plastic Male to Male adapter falls out and gets lost. I super glued it to one end to resolve this.

Worked great for me. I wanted to run two 3M lengths in opposite directions from a central power source, and this let me do it easily. Liked that it came with two sets of pins, as one of my LED runs didn't have one. For my application the cables could be a bit shorter, but I'd rather have them too long than too short. Haven't noticed any flickering or dimming along my runs, but they're also under 10M total length so the power supply can handle it fine. Maybe as an improvement, they could include a little 3M tape for mounting, but I don't have any complains. See my photo for the fine display of cable management underneath my bar.

This is a good quality cable that allowed me to position an RGB strip light AC adapter and IR remote well away from the end of the RGB strip light itself. I connected one end of this cable to the end of an RGB strip light on a rain gutter. The other end of the cable attaches to the IR remote and AC adapter on my front porch. The cable is narrow enough to tuck behind the trim on my vinyl siding. A really good option if you need your strip light to be in one location, with its IR remote and AC adapter in another.

Not sure if the product works because when it arrived, there is no "4pin plug adapter" in the package. I contacted ESUMIC about the missing parts. They wanted me to take a picture of the product (not sure about the purpose of this). I sent them the picture and a week later another package arrived with only one 4pin plug adapter while the product page clearly said that there should be two. Now I ended up with two splitter but not enough adapter therefore still cannot make my LED strip light work completely.

I wish it came with one additional Male pin connector, so you may need to order an additional. Somethings these connections can be a little sketchy so i recommend once you have found the secure connect, use an epoxy like material to keep that connection from moving around and losing connection.

Don't know how else to put it, but it does what it's supposed to do. And seems to be really well made.This helped me connect an LED strip that was no where near a wall connection.The LED strips works just as well as it did without it, no complaints.

Bought this for my 16.4 ft setup of LEDs in my jeep xj to make the control box more hidden. Does the job, only downside is that the ends come loose, but nothing some electrical tape can't fix. Happy with the product.

Très bien

Been looking for these wires everywhere but can not find a reliable source however, these work perfect and have lasted more than a year. After lots of shopping this is the most reliable and cheapest place

Good quality cable, will work to link together any 4pin LED strips (have several from various brands and they all link together. Just keep in check that your main adaptor can handle the extra load as some cheaper ones are limited on total power

Not sure how much of a review I can write for a cable?!?!It's reasonable quality, it's extremely "cable-like" and extends my LED set up. lol

Bought it for what it does. Yes, it does what they say. If I need another I will be buying again.