(6 Pack) Supershieldz Designed for LG G2 Screen Protector, High Definition Clear Shield (PET)

Good product! It was so easy to apply. Honestly if you get bubbles or dirt on the screen, there was something wrong with your application method.PROs:- doesn't have much glare- has a "grippier" feel compared to the slippery stock screen protector that came with the phone BUT your fingers still glide smoothly over the screen- does not affect the screen's sensitivity to touch at all- is about 2mm smaller than the LG G2's actual screen, which is good because you're sure it won't lift off so easily.CON:- a minor thing: The little tag/ sticker with the numbers that you use to pull off the plastic is stuck to the lower part of the screen protector. (I've found that when applying screen protectors, it's easier to approximate edges when you start at the top, where the cutouts are.) To remedy this, I got a piece of tape, stuck that to the plastic film and used that to peel it off.APPLICATION TIPS:- Choose a room with no open windows, no fans or anything that can rouse up dust (e.g. a person walking by)- Place phone on a sturdy surface, leave it there and clean the screen with the cloth provided (without picking up the phone)- Pull off plastic film from the screen protector ONLY HALFWAY from top edge (where cutouts are).- Start applying the top edge of the screen protector first (use the cutouts to approximate the "perfect" position).DON'T PEEL OFF the plastic film completely right away! And DON'T TOUCH THE STICKY PART for whatever reason! [I've read reviewers who said that they "clean" the sticky part first before applying. There's no reason to do that.)- When satisfied with top edge placement, use fingers of one hand to hold it in place. Allow the screen protector to stick to the screen by bending it a little (remember, bottom half of the plastic film is still there).- While allowing the top part to stick to the screen, simultaneously peel off the plastic film from the bottom half using your other hand until the screen protector is completely sticking to your screen. This keeps exposure to dust and lint to a minimum.- Use the card to push out the little bubbles. (use a credit card if you think the card they provided will scratch your screen protector)I've always used this method and I've never had problems with bubbles or dust! (I still have 5 of these screen protectors left.)

This is the best bargain of all the covers I have used by far. You can't beat the price for 6 covers! It's like any other that stick to the screen, it fits my LG2G perfectly. Suggest starting at the bottom of the screen so by the top it doesn't cover any sensors. I did mess up the first one I tried with a finger print on the stickyside and had to trash it, but still had 5 left, the ssecond try came out perfect, though I did have some trouble getting the outer application tab off, the paper and glue stayed only the plastic top layer peeled off. Took a while abd and a lot of q_tip and Windex to remove the glue from the corner, but it finally came off . No scratches, or bubbles if your careful and use fingertips rather than nails. Anyhow , I still have 4 left, and time will tell if this is more scratch resistant than the original that came with the phone. Regardless of all that, it's still the best deal out there. When it gets too scratched Ill put on a new one. NBD. It fits fine in my case. (Flip cover, open on,close off screen) . After a few weeks Ill see how it holds up against scratches and repost on that, for the 5th star. Either way, for the money, $3. I can't imagine having another opinion. I don't buy the claims of any of the over priced scratch proof screen protectors. At least on my smart phone.I'm definitely investing in a good one for my new Kindle Fire HDX 8.9. I don't think I want to be changing it if I can help it. I'd recommend trying these before spending a lot on another brand.

Okay so I will be reviewing the product and not the difficulty of applying the screen protector. EVERYONE should be an expert at applying these by know especially with how frequently people upgrade there phones. First off the film is very thin and cut out just a tad smaller then the phone which to me is correct if you ever had a case that hugged the phone all the way around it can interfere with the film and cause it to bubble up or move out of place over time. I cannot say enough how clear this screen protector is! I feel like it's not there at all. To top it off they give you six for a great price. Also it does not interfere with the functionality of the digitizer. All swipes and clicks are registered just as it did without the protector. I would absolutely recommend this screen protector and with the amount they give you it should carry you through to your next phone with a clean looking screen at all times.Now for me install was a breeze apply'd it correctly first time. The screen protector is seperated into three parts sort of like a sandwich you have the film in the middle and two protectors on the top and bottom, both protectors have tabs telling you to remove when applying and direct you to which side goes down onto the screen or the adhesive side (probably not adhesive but for lack of a better word) and the top part that you remove once you are done and satisfied with the position of the screen protector which then exposes the actual HD film. I usually remove the adhesive side and ALWAYS face it downward as it attracts dust and debris. I usually start at the top of the phone and slowly apply it downward while at the same time with my finger removing any air bubbles that appear. Couldn't be easier.