Permatex82099 Spray Sealant, 12 oz.

I used this on a small oil pan leak from the seam. The car manufacturer used gasket maker but this stuff worked. Just make sure to prep with brake clean like the directions say then use a clean rag to wipe up the rest. Then apply 3 to 5 coats waiting at least 1 minute in-between coats. Trust me it works.

16 Month Update:Code never came back. This product sealed the vacuum leak - which had been plaguing me for years.*************For a long time I had been having an intermittent check engine code that relates to the evap emissions test part of the OBDII on my 2005 Mercedes C230. It does not affect the operation of the vehicle or the engine. It just means there is a small vacuum leak when the system tests itself which throws the code. Consequently you can’t get your car smogged or registered. I read in various places that this is a common problem with this vehicle and even watched YouTube videos of people addressing repairs etc. I learned thanks to all this information (!) that there is a specific spot close to and just behind where the fuel filler opening is located. The part includes a plastic barb which a hose connects to. The barb develops a hairline crack causing a “small evap leak” (P0456).Many people solved their issue by replacing the entire filler neck assembly, which can cost anywhere from $150 for a used part to $500 for a new part. Not to mention the 2-4 hours in labor.The vehicle has a rubber shroud directly behind the fuel inlet which you can push down with a flat screwdriver. You can see right in that location where the suspect part is located. I used the straw attachment and sprayed all over that area about 5-8 coats of this liquid Permatex. It sprays on like liquid and congeals into a nice rubber sealant after a few minutes.I have not had the P0456 code since using this spray sealant. Given the tight space limitations involved, there’s no way I could’ve made this repair using a different product.I would recommend this product for any low pressure (or vacuum) leaks. The straw sprayer is perfect so you can get into tight spaces. It seems particularly suited for things like what I accomplished - sealing a hose/barb fitting - a weak spot in any vacuum system.

This product worked well under heated environments. Multiple coats are suggested. It definitely did the job. Suggestion on the product labeling to make it more detailed/descriptive as to what the product is for.

Used for cast aluminum transmission leak on mower. Applied external after plate removed and cleaned. Did not work. May have worked if applied from inside but that would have required tearing the transmission down again which would defeat the purpose.

So I had a leaky transmission pan that would go thru about a gallon of transmission fluid a year. I had to constantly check my transmission fluid level and when it was low my car would shift terribly. I've brought my car to two different mechanic shops and neither of them could totally fix the leak. I spent almost $1000 on them.I sprayed about 6 coats of this one day. It helped the leak but didn't stop it. I did the same again and it completely stopped the leak. Years and 5 mechanics later this was the only thing that worked for me. I used this a little over a year ago and it's still not leaking.

Fantastic. Stopped the air from leaking out of my tires!!!!!

I had a leak in my power steering fitting. After cleaning and applying 3 coats of this, the leak reappeared after a week.

We rebuild injection pumps and other engine components. After we perform a rebuild we spray it down with this stuff so we don’t have any leaks.We sealed a cast iron oil pan internally with this product. It was casted so porous it would leak. We sprayed a coat on every 24hours and it held.