I have a doubt which one has if the 17011 or the 17025 or if they are the same sensor and only the code number changes. Which of the two is compatibl

17025 is a LSU 4.9 sensor 0-5v wideband reading

Is it normal for these to come "used" looking? The sensor end was very sooty and had obviously been run in a very rich exhaust?

These say on this page, but all the ones I've seen look used because they are each tested and "burned in", meaning they're required to perform under normal operating temperatures for some significant period of time without flaw or failure of any kind. I used to work in a place that made microwave radio equipment and we had to burn in each one, like 24 at a time, overnight, monitored by computer and tested at it's coldest range too. The data was monitored continuously and if any parameter drifted, then it was torn apart and adjusted and sent back through the burn-in test again, repeat. It seems like there's always one that can't be fixed. Those were recycled. But anyway, an oxygen sensor is required to work in some extreme temperatures. Heat can change things if even the slightest thing is vulnerable or flawed in any way. So, in my opinion, reading comprehension, plus experience, I'd be happy if I got one that looks burned in. If these other comments are correct, and they get shiny new looking sensors, that means YOU are their QC department. All the pictures of every sensor from every vendor looks browned. That said, you said it looks "sooty" and carbon comes off on your hands? That could mean that it had been installed in a rich running car, true. However, it may be that they didn't clean it after burn-in during QC. However, it better not be shiny as a brand new penny, because that means you're their QC department. I have had that happen. They kept asking for more pictures. I felt like I should be on the payroll, but in China, ..? Anyway, It's going to be a judgement call. I'm going to say that these should be tested in sooty conditions because that could happen on a cold day in any car. But it's pretty obvious that nobody cleaned it off. The question is why they didn't. If you were sneaking a bad part in a box, you'd think you'd clean it off, right? If I were you, I'd go with my gut feeling about it. If it's one of the more accessible ones, why not try it? It's not like you'll make it more sooty. One reviewer said "buy 2 so if one is bad, you can simply grab another." It does seem to me that the hardest part is getting everything ready to replace a part and clean up after. So maybe that is the best advice. Buy another 1 or 2 so that if that one is bad you need only try another while you're under there. Maybe this is why OEM parts are so expensive. They'd better work or there's hell to pay. I never thought of it in these terms. But a $20 one? Get 2. These aren't $20 so I suppose people return the extraneous ones, if they're good or bad. Either way, they're looking for a refund. You know? The more I think of this, the more complex it gets. Since you're going to return it anyway, try it but wait until you've got another, just in case. Sorry this was long. It's puzzling. Not as clear cut as the other answers. I don't think they've seen many of these. Even online, they're obviously burned. It's the soot that makes it complex.

Is this tha same as aem 30-2004 wideband?

Sure is. I buy these as replacements for the AEM

How many wires does this sensor have please? I need to attach it to an Air-fuel Gauge having 3 wires

That will not work no matter how many wires it has. Afr gauges are meant to be driven by a wideband controller. The sensor is the input to the wideband controller. The sensor isnt capable of directly controlling the gauge.

Desertcart Logo

Deliver to EGYPT

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

⚡ Unlock precision performance with Bosch’s ultimate wideband sensor!

HIGH TEMP HERO - Operates reliably at temperatures soaring up to 850°F, perfect for high-performance engines.
BUILT TO OUTLAST - Robust sensor design with seared protection tube ensures longevity under extreme conditions.
COMPACT POWERHOUSE - Lightweight metal build (just 6.2 oz) with precision machining fits seamlessly into your setup.
PLUG PLAY PERFECTION - True direct-fit OE connectors and pre-coated anti-seize threads for effortless installation.
PRECISION AIR FUEL MASTERY - Experience exact air/fuel ratio readings from 10:1 to 20:1, not just rich or lean signals.

The BOSCH17025 Oxygen Sensor is a premium wideband air/fuel sensor engineered for high-performance vehicles. It delivers highly accurate air/fuel ratio measurements (10:1 to 20:1) using an advanced sensing element, surpassing traditional sensors that only detect rich or lean conditions. Designed for durability, it withstands temperatures up to 850°F and features true direct-fit OE connectors with anti-seize threads for easy installation. Compact and robust, this sensor ensures long-lasting, precise engine management for enthusiasts and professionals alike.

Specifications

Brand	BOSCH
Item dimensions L x W x H	5.83 x 3.94 x 2.2 inches
Material	Metal
Item Weight	0.39 Pounds
Style	Oxygen Sensor
Measurement Accuracy	HIGH
Measuring Range	10:1 to 20:1 air/fuel ratio
Mounting Type	Flange Mount
Output Type	Physical
Specific Uses For Product	Oxygen Sensor
Upper Temperature Rating	8.5E+2 Degrees Fahrenheit
UPC	028851170253
Global Trade Identification Number	00028851170253
Manufacturer	BOSCH
Model	Premium Wideband Air/Fuel Oxygen Sensor (1-Pack)
Item Weight	6.2 ounces
Product Dimensions	5.83 x 3.94 x 2.2 inches
Item model number	17025
Is Discontinued By Manufacturer	No
Exterior	Machined
Manufacturer Part Number	17025
OEM Part Number	17025, 258017025

Reviews

C**B

just like the holley but 1/2 price

Works perfect for my holley terminator x max ls swapped 6.0 no difference from the holley one except the price it seems

20.09.2025

L**Y

Good quality

Works well on the custom install. Good fit and quality. Its a Boush of course

2.07.2025

P**O

Good product

So far so good. Reads perfect. No complains. Plug and play for my aem gauge.

23.05.2025

T**.

Sniper

Works well with Sniper I and II.

19.09.2025

N**Z

Buyer beware

Do not buy wideband sensors through Amazon. First I purchased a knock off wideband sensor to save some money and it was a waste of time. Did not work at all, so I sent it back. I then ordered what I thought was a "real" Bosch wideband sensor and it too didn't work, AFR was all-over-the place. I replaced a lot of parts thinking the sensor could not be the problem. So, I switched to a used backup Bosch sensor I had from another project, and behold the car ran beautifully. I use Amazon for many different types of daily use items, but I won't be buying electronic critical sensor auto parts that could destroy an engine that required both financial and sweat equity to build. Buyer beware!

20.08.2025

M**Y

Garbage

Narrowband???Would have been nice to know before I bought it, it screwed with both of my EFI systems and cost me a lot of money.Never again.

8.11.2023

A**I

Very good

Resolved the issue

7.09.2025

L**Y

great price

very easy to buy/receive. also cheaper than any of the car part sites that I checked. OEM replacement for my Holley Sniper.

6.06.2024

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.