Vortex Optics Pro Series Riflescope Rings

I recently purchased this product ie (April 2025) for a project I've been working on but needed something of better quality. These Vortex medium scope rings in 30mm are the perfect match for the LPVO 1x6 Scope that I'm using. The build, craftsmanship, materials & over all aesthetics of these rings are excellent. Who ever designed these should be awarded. Everything from top to bottom have the proper torque settings which in my opinion every company who makes scope rings should put on their products. It makes absolute perfect sense to do this. I liked so much that I will be purchasing more for my other projects. These come in several sizes so if you're in the market for high quality scope rings check these out.

Bought 2 sets in medium height to mount a 50mm and 56mm scope on a Rem Model 700 in 223 and a Savage Model 10 in 308, respectively. Plenty of room between the barrel and front end of each scope (1/2" on the Savage Model 10 and 5/8" on the Rem 700) with the medium height. Definitely did NOT need high mounts. Low mounts might have been ok but would not have left much clearance between the front of the scope and barrel with the low mounts. Solid construction and the finish on them is excellent, no shiny reflective surfaces. I would definitely buy these again.

Very nice set of scope rings that will fit your Arken scope. This is the standard all others are compared to, save time and buy right buy once.

I’ve purchased two now. They’re the read deal. Theyre so close to perfect alignment when I mount them I’m tempted not to lap them, but I have the tool so I do it anyways. But even as someone who believes in lapping (maybe incorrectly) these are so close I could get away without it. Probably straighter than my scopes. Low for 56mm on a 20moa rail (sig cross) worked fine and had clearance over the hand guard. Medium is usually a safe bet / starting point.

Very solid rings. Having the torque numbers on the rings is nice.

very nice.. it work perfect for me... it could a good luck

Solid Quality as always with Vortex

These Vortex rings provide rock-solid mounting that holds zero through extensive use. The machining quality is immediately apparent - perfect concentricity with no burrs or rough edges that could mar your scope. The finish is uniformly applied and highly resistant to scratches, matching well with most scope finishes.The torque spec markings are clearly labeled, eliminating guesswork during installation. The split ring design makes mounting straightforward while maintaining absolute rigidity when properly torqued. Height measurements are precise, allowing for proper cheek weld and scope alignment. The included Torx screws are high quality and don't strip easily.Alignment between ring pairs is excellent, preventing any unnecessary stress on your scope tube. The clamping surface is precisely machined with no sharp edges that could damage your optic. They're a bit more expensive than some alternatives, but the precision machining and reliable lockup justify the cost.Worth noting that proper torque sequence during installation is important - the rings respond well to methodical, even tightening. For precision shooting applications where absolute reliability is crucial, these rings provide the confidence that your zero will stay exactly where you set it. The quality control from Vortex is evident in every aspect of construction.​​​​​​​​​​​​​​​​