Genuine Mazda Accessories KD33-66-122 Fog Light

Works flawlessly. Easy to install, about 10 minutes. Great for adding foglights to my factory harness on a 2014 Mazda 3.

I recently added the foglight with pre-wired for my 2015 mazda 3 sedan. After doing some research, I need this switch to activate the fog light. This is the cheapest option compare to Ebay and Mazdaparts. The part came fast and took about 5 minutes to install. Just pop the old one out and slide this part in. The "clicking" feel is a bit softer than the OEM one, sometimes I forget the turn signal is still on since there is no loud audible click. Overall, I recommend it if you want to add the foglight to your mazda.

Installed this on a 2015 Mazda 3 I Sport, and it works great! Fog lights are now fully operational, and the turn signals reset after turning the steering wheel straight.

I've been using this for a few months now with no issues. Turn signal + switch functionality feels brand new and quite a bit more fluid than the old stalk.I have a 2014 Mazda3 iGT, which does not have fog lights originally. It does, however, have all the wiring/harnesses already included if you want to add them later (which I have done). This stalk is perfect if you're trying to do that.Removing the old stalk is the hardest part. Once that's done, you quite literally just slide the new stalk in until you hear a click, then test it.

The install took about 5 minutes. No problem

Perfect, easy install

This worked great and was easy to install. The inly down side is when the switch is hit for a turn signal, there isnt that click that most cars have. The switch has little resistance for the turn signal. Other then that it works great and was easy to install

My '14 mazda 3 didn't come with fog lights so I installed aftermarket fog lights. I used this selector to replace the one without the fog switch.It was very easy to install. Just turn the wheel to the left 90° and remove the two screws under the steering column. Then pop the cover open, unclip and slide out the old selector, and slide the new one in.Like others have said, this selector is a bit less stiff than the original one when using the turn signals. I actually prefer the new one. It works perfectly

Fácil de instalar

This light stalk works perfectly on my 2015 Mazda3. Just installed new fog lights (not standard with my car). Took only 20 min to install. Unhook battery, remove 2 Phillips screws in steering column, pop out old stalk using nail file attached to nail clippers. And reverse to put back together. Cannot beat the price for this. Just make sure you buy the correct stalk. My car does not have auto lights so this product was correct. If your car has auto lights, there is another stalk available for that.

aucun probleme sauf les délais de livraison,tres satisfait de ce produit.

Funciono perfecto, y muy fácil de instalar

It plugs right in and works perfectly. To remove the old one, turn the steering wheel 90 degrees to expose the plastic tab on the unit. Press the tab carefully with a screw driver. The unit will then slide out.