KD FramesStudio Bifold Futon (Full)

I bought to replace a completely inadequate "sleeper sofa" in a travel trailer slide out.My problem was that the inside "length/width" side to side of the slideout was 73.5 inches. Everything including this is 74 inches or 74 1/2 inches. I looked and looked and looked and with metal, there is "no give" on the width. I finally took a hard look at this and figured since it was wood, I could cut it down...just enough to fit.So, did it work? Yes but... This is very well engineered and designed and that all assume you are NOT going to cut it down to size like I did. But you have to be careful. The best way, in retrospect is to cut BOTH edges and not just one off including losing one of the dowels on each side. That worried me for structural integrity, but it is a bit over engineered where all of the other pieces once together compensate.And in the end, it all went together and is structurally sound... I had purchased metal support pieces and extra screws assuming I would need them when I did NOT. I did have to do a couple of my own "pilot" holes to ensure a good bite with the screws, but in the end, it works great and is the ONLY thing that will fit.I now have a full size futon that extends out perfectly so when in "sofa" mode it allows the slide to move in without hitting anything. Then when you get to the campground, put it in bed mode with a good six inch mattress and a true real life adult can actually sleep on it...comfortably...I am very pleased and by having to adapt it with a bit of engineering/construction background, I was able to see how well designed and constructed it was for people who do NOT have to adapt it including cutting off edges and structural dowel fasteners.Great product AND, drum roll please, American made... And for what you get, pretty inexpensive compared to anything else on Amazon even before the tariffs. Including a high quality six inch futon mattress my total price was 398 bucks. I am impressed.The only weakness would be individual units where a piece might be cut where the grain creates a structural "break point" and a screw could break it or stress. But I see at least one other buyer who had this happen and the company responded on a weekend and immediately sent out a replacement part. So, I'm thinking they are aware of it and have excellent customer service to address it. This is due to their choice of wood and its intrinsic quick growth grain orientation, however tulip poplar is a great choice of wood for this overall, relatively inexpensive, light, good construction characteristics overall for this type of product. This was well thought out by whomever runs this company.

This is a solid wood frame. At this price point, I was not expecting this level of quality. I want to point out a couple of other things. Firstly, the instructions for assembly are clear. This is a huge differentiator, because in many cases deciphering the instructions for self assembly items requires a degree in cryptography. Second, the precision at which the pre drilled holes are place is excellent. All too often, either because of poor manufacturing, I find I have to sort of force things into position to line up. Not the case here. Lastly, customer support. I found a crack in one of the pieces of wood, and emailed them. I had a reply same day…. On a Sunday! I am awaiting the replacement which was shipped out next day. Great experience overall.

You definitely need a drill to put this together. The instructions are clear-ish. I had to redo one part because I had the boards with the wheels the wrong way. I also want to note that when I drilled the top part on the bottom part it did not line up perfectly. However, I managed to put this together by myself in around an hour and I have put together various easy furniture pieces before, this one wasn't much more difficult. It helps to have a decent amount of room to put it together as well. Once put together the quality was pretty good, the wood pretty sturdy and you definitely want a comfy cushion on top (if it's too thin you'll feel the hardness of the wood). The couch folds easily and I have it in my living room. For me it was cheaper than a couch and works well as a bed so it was worth it for the price. It's up to you to decide if you want a real couch that's more comfortable or if you want to pay less for "get what you pay for" replacement.

Made in the USA ... as far as I know. Exactly as described. Easy to assemble. Mind you my son-in-law put it together for me, but didn't seem to have any issues even with me rambling on and distracting him. A powered screwdriver was in use.No creakiness. The wooden boards run length-wise similar to a standard bench, which makes it more comfortable for sleeping, since they run the length of the body.It's super sturdy. My only complaint is the space between boards in the seat and back area is 3.5 inches and 4.5 inches in the middle (between the seat and back).In a perfect world the boards would be wider or there would be less space between them.The construction itself works perfectly well for general use as extra seating or an extra guest sleeping solution.For everyday use, some extra support such as cardboard or coroplast sheets may be needed to fill those gaps. I would also recommend a non-slip futon grip pad or yoga mat for the seating area to keep your mattress in place so it isn't slipping out.Fortunately, any futon mattress will work with this frame. And I do mean any, from a Japanese style floor mattress, to a cheap 6 in. futon mattress, to an expensive innerspring mattress, to whatever your heart desires.It is relatively easy to lift the back support beam into 1 of 4 seating positions from one side of the frame.It will fit into pre-formed grooves allowing your desired angle of comfort.If you have a heavier (thicker) futon mattress, you may need to remove the mattress to lift the back into the desired setting, physically move the frame back to where you would like it to be situated, and then place and adjust the mattress as necessary.I am a heavy person, weighing in at about 300 lbs with some back problems (spondylosis, osteoarthritis, etc.), living in a small apartment with limited space, and have found this to be a very viable solution to seating and sleeping arrangements.I actually prefer this over my standard full sized bed with a 12 inch foam mattress for sleeping.I have much less stiffness and more mobility after casually falling asleep on the futon watching a movie to sleeping on the bed that's supposed to support and align my spine.The futon mattress may need to be replaced from time to time, but this is a well crafted and sturdy frame that I expect to hold up for many years to come!Overall, I would recommend this frame over any other that is out there or I have tried in the past. And did I mention, made in the USA, enough said.