Rechargeable 4V Cordless Screwdriver, Prostormer Palm-sized Electric Screwdriver 1500mAh Lithium-Ion with LED Light, 33-Piece Bit Set and USB Charging Cable

The media could not be loaded.  I am glade to get this. This is now my primary screwdriver.I have the Milwaukee M12 drill driver (12V). It is good, however it is heavy, large, too powerful and hard to hold for small screws for electronic device such as camera, laptop. The reason I said it is hard to hold is it because it is L shape, and kind long from the handle to tip of the bit. For small screws any little shake will miss the screw.So I decided to get smaller one.After research, found this one. It is between precision driver and my 12v.I glade I made the right choice. Because it is in between of the two. I can use it at larger range then both of them.It can be used for reguler house work, furniture assembly, install door lock, tighten screws on your wall mount etc.It can also be used to fix electronic devices (camera, computer etc.) Yes, you can even use it on fixing your cellphone, but you have to understand and be familiar with it before try to work on precision items.Quality: good and solid build. When holding in hand, it felt metal weight and does not feel cheaply made.Design: like the way I can vertically hold it like my screwdriver.It also come with hard storage case, which is very nice and easy to store.Battery level indicator light: there is battery indicator that indicate the level of the batter (green light)Light: the light is bright, and it cover 80% of 360 degree of where the bit is pointing. It creates a better view for me. (My M12 only cover 45% arround the bit.There is torque adjustment on top (or end) of the handle. Even at minimum, it is still powerful on screws for battery cover of toys. So be careful dont press and hold for long and kind thinking it will stop.The correct way of using it on small screws and not strip is1) hold it very light(or gentle) don't hold too tight. So if it tightens enough, it can bounce back and turn in your hand to opposite direction (instead, if you hold it tight, it will continue screw in and stripped the screw)2) press and release the button immediately. Do not hold for long time. It will make 2-3 turns, and that is usually enough for the small screw, if not then press-release again for another 2-3 turns. And remember hold it light. Then at end try adjust the tighten manually (moving the button in the middle as manual mode)I think unless I have bigger job, I will just use this for all the work in the house

I use this for light jobs in my occupation as a refrigeration technician. I keep it in my belt-worn tool pouch, but quickly found out that you don't want to drop it as when I did the insides popped out. Amazon sent me a replacement immediately. I now keep the new one tied down and although it's a little fragile, I would still buy it again if ever needed because of the features. Amazon should also get five stars for Customer service.

Works better and easier than trying to manually tighten screws

Compact cordless driver that fits comfortably in your hand. On/off button easy to get to as is the directional slide switch. Overall very satisfied- until the speed control wheel stopped working. Email company and with 16 hours they notified me a replacement driver was on the way. Very good tool - great customer service.

This rechargeable school driver cause that's what it is it's not a drill it's a screwdriver cause it sucks. It has no power it actually stops spinning and it has to be recharged every 20 minutes I'm Very disappointed

Bought this to help build a lot of Ikea furniture. It was decent to get the screws started but at only 4V, not nearly powerful enough to drive them all the way.Also, it's not a well built product. The screwdriver fell about 12" off a bed on the floor, and the whole thing broke. The little bearing rods for the direction mechanism fell out, and when i put everything back together, the plastic casing broke.

Not sure what I expected for $20 but unfortunately this thing just didn’t work out for me. The torque isn’t what you want, just don’t hardly make a difference, the power is good, just good enough to strip the screws but not good enough to really drive them in no matter the torque level. The worst part though, is that the magnet that is supposed to sit in the Bottom of the drill bit holder head came right out, like they didn’t affix it at all. It’s too bad, this would be a great product but just misses a little on a few marks, if you have bad hands or wrists this might be a solution for you though, it works ok, just not well enough for my use case.

Used in bathrooms to remove old drawer & door pulls & replaced new ones. Very lightweight, easy to use, battery held up nicely, carry case included. Nice for ladies’ tool boxes.