10Pcs Single Linear Rotary Seal Amplifier Potentiometers Type B B10K 10K Ohm Knurled Shaft 3Pin

Here is a great example of customer service. I purchased the pots wanting to replace a 20kΩ pot with a 10kΩ pot. At least I think I did. BTW, no schematic. I had measured the original pot at 20kΩ. I replaced it and the circuit didn't work as intended. I measured the replacements, my DVM showed 100kΩ, and contacted the vendor. They measured their stock and found them to be in compliance. I measured mine and they weren't. Or were they? I grabbed another DVM and indeed, the pots were in spec. The original "20kΩ" pot was really 2kΩ. Aha! I really need a 1kΩ pot. And that faulty DVM goes to the recycler.Thank you Lily & Moon-Light Tech.

I bought these to repair a guitar pedal. They worked perfectly. Great quality. Easy to install. Very clean, not scratchy when using.

They are very small, fit and work

Excellent product and Seller as well, I recommend the purchase

Works well as they should

I bought three sets in 10K, 100K, and 1 Meg values. The lower valued ones are OK but the 1 Meg vary wildly between about 740 to 870 K between different pots. What’s more, the value isn’t even marked on the case which is what led me to check them in the first place. I need small pots for a crowded control panel and these otherwise would have been a good choice. I’ll either return or trash them depending on if I didn’t throw out the original box. I’d rate them 1 Star if not for the other ones being a lot closer to the right values.

I will most likely be returning these.The 1M pots are actually measuring around 870k, nowhere near 1M. Like another review said, they are not even marked for their value which is what led me to check. Very disappointing.

These work as intended, providing smooth attenuation of line-level audio signals for maximum listening enjoyment.