This product is based on the detection of the tank water level to control the water level. With a small, simple wiring, low power, high switching capacity, strong anti-interference function and high stability. Automatically ON when water level goes below the low level probe and automatically OFF pumping when tank full signal detect. 7amp relay which is suitable for upto 1 HP Pump. it has also under ground tank low level protection to protect pump dry run. Two Mode Of Operation: Mode-1: Works with Starter Type Pump Control Panel: At low level Start Relay (Relay1) will Activate for 2.5 sec. to start the Pump and then Deactivate. At High Level Stop Relay (Relay2) will activate for 2.5 sec. to stop then Pump and then Deactivate. Mode-2: Works with Normal Pump (ON/OFF Switch Type) Only Relay-1 will be in Use, At low level it will gets ON continuously. At High level it will OFF. Interlock: If Lower tank level goes below the low level, pump will immediately gets OFF if it is running or Controller will not allow to start the pump if it is already OFF Lower tank level OK LED will gets OFF. and it will gets ON when ever Lower tank level reaches to High. This product does not need to buy another probe, using household wires can replace probe Note: This product comes without cable (probe) Specification: 1). 7Amp Relay Suitable for upto 1HP pump 2). Two Mode of Operation 3). Led Indication for power, Pump ON, Upper Tank Level High, Medium & Low, Lower tank Level Ok 4). Works On 12V AC/DC, Min 500mA Package included: 1x Water Level Controller ModuleType: Security Circuit and Motion DetectorPower Source: ACRoHS CompliantMaterial: PolyurethaneWeight: 0.15: Universal Fully Automatic Water Level Controllerbrand: jr electrokitsModel Number: Universal Fully Automatic Water Level Controller, Works On 12Vac/DcROHS Complaint: YesWidth: 10Height: 10Battery Type: NANo Of Batteries: NABattery Size: NAOther Power Features: NA
Trustpilot
1 month ago
2 months ago
