iCrimp SN-48B Pin Crimping Tools 3.96/4.8/5.08/6.3 mm 26-16AWG Crimper 0.14-1.5mm² for Dupont & JST-SM Molex Connectors and Terminals

The iCrimp Crimping Tool has become an essential tool in my arsenal for working on servo wires for RC planes. It's a game-changer that ensures a reliable and secure connection, and here's why. The precision and ease of use of this crimping tool are simply outstanding. It's designed to work with Dupont-style connectors commonly used in the RC hobby. The ratcheting mechanism guarantees a consistent and firm crimp every time, eliminating the frustrations of loose connections. I particularly appreciate the tool's ability to handle a range of wire gauges, making it versatile for various RC projects. The ergonomic handles provide a comfortable grip, even during extended use. Overall, the iCrimp Crimping Tool has made working on servo wires a breeze. It ensures that my connections are not only secure but also professional-looking. If you're into RC planes or other electronics projects, this tool is a must-have for achieving reliable and precise crimps with ease. It's a small investment that makes a significant difference in your projects' success and overall enjoyment.

This is a really quality crimp tool, comfortable, solid and well balanced. It's kinda luxurious TBH. It wont do all the work for you and it takes some practice and can be a bit fiddly at times to get the doohicky positioned in the right slot (story of my life) but then you squeeze and its perfectly crimped. As far as these things go it's top notch. This is one you can put in your will even if your only intent is to mess with your kids.

This Crimping Tool is an excellent tool for precise and consistent crimps. It’s easy to use, even for beginners, and produces clean, professional-quality connections every time. The ratcheting mechanism works smoothly, and the jaws are well-aligned for Dupont-style terminals. It feels solid and comfortable in hand, making longer projects much easier. Fantastic value for the quality

I bought mine in 2021 and only used it a couple of times so I did not get enough experience until today when I started making wires in earnest. Mine does not form the O crimp properly, that being the one at the insulation end of the connector. I am using 24ga silicone insulated wire which is very flexible, tinned and all around excellent. But this insulation is squishy and while the O crimp I think is intended to go around the insulation I cannot do that or the insulation squishes out and prevents the connector from sliding into its shield. In fact it’s not an O crimp at all, it’s just a bigger B crimp. On mine that bigger B is malformed, I think because of a defect on the hammer jaw. (One jaw moves which I call the hammer and the other remains stationary which I call the anvil. The anvil forms the curves of both the O and B crimp except as I say they’re really both B’s). The defect is in the casting and looks like it forms both an inclusion and a drop out which is to say one bit of it makes the channel smaller and the other bigger but these are by very small amounts. I think the malformation distorts the way the material flows in the die because one half of the O-which-is-really-just-a-bigger-B is malformed and the other isn’t. The top loop is squashed so the connector will not slide into the shield and requires fussing with pliers to get the shape right. The only way I can get a usable crimp is by using the 28-24ga jaws, setting the connector depth as recommended, crimping it and then pushing the connector in farther so the O crimp is in the B hammer/anvil and crimping it again. This is done with insulation stripped far enough that it’s bare wire through both the O and B areas (about 5mm). The resulting crimps are consistent, very strong and insert easily. I have only used these on one vendors connectors (gikfun) which I got at the same time as this crimper and they’re excellent but they state in the listing they’re for 22ga wire (and I’m using 24ga). Mine had the same behavior with 22ga silicone wire, I just didn’t go far enough in testing to find out if the same double-crimp solves it.

I have all three of these crimpers and I recommend that plan. I can always find a fit in one of the tools and the quality is good enough that I have gotten to the point that I almost never mess up crimps anymore. I have not done any of the tiny 1mm JST crimps but everything else has worked well. I just keep all of them in the same place and I can always find the best fit. With the right size you wont damage the pin (especially the retention barbs) As long as I don't lose these I will probably never have to buy another crimper in my life time. Well worth the price and I heard enough recommendations from the 3d printing community that I was confident that I was making a good purchase. And they were right. I also recommend a lighted desk magnifier since you don't appreciate how hard crimping can be on the eyes without one. If you have to crimp something (avoid it if you can) these are just right.

Great product! I would purchase again from this seller!

Work perfectly on TE Connectivity Open Splice Barrel Crimps! Extremely well priced.

容易にギボシ端子の圧着が出来ます。 圧着後の仕上がりも綺麗に出来ます。

As described by seller. Product was quality built and versatile as it can crimp several styles of connectors. I would recommend

アマゾンのレビューはいつも半信半疑ですが、価格も高くはないので購入してみました。結果、今までXHやデュポンコネクタは中国駐在時に購入した工具で圧着していて失敗が多かったのですが、この工具にしたら圧倒的に失敗が減りました。ダイスの作りも以下まで使っていた工具よりだいぶ良さそうに見えます。少なくともホビー用途なら（わたくしはホビーユーザーです）十分に満足できると思います。

Muy buena herramienta Cumple sus especificaciones técnicas Buenos engastes en terminales y calibres pequeños Fue buena compra y buen precio