Deliver to EGYPT
IFor best experience Get the App
🔐 Lock in your peace of mind with YaleLocks!
YaleLocks Euro Double Cylinder Kitemark 35 x 50 (95mm) Nickel Plated Visi
Finish Types | Nickel |
Material Type | Nickel |
Item Weight | 0.73 Pounds |
Item Dimensions | 4.33 x 7.48 x 0.98 inches |
Color | Nickel (in Visipack) |
Item Shape | Round |
Style | Modern |
Controller Type | Hand Control |
Lock Type | Key Lock |
Special Features | Key Unlock |
E**Y
Good value and quality.
Good value and quality.Arrived when expected and well packaged
J**R
El producto se corresponde perfectamente con lo ofrecido
Buen producto pero sería bueno que viniera con 5 copias de la llave como casi todos bombines que están en el mercado.
J**P
Easy to fit and feels secure
The cylinder was very easy to fit, there were clear instructions on the packet, and I also found some how to videos on youtube. The security is good, with more levers than the lock that it replaced. All I needed to fit it was a screwdriver, no drilling or faffing about. It just slid in and then was screwed into place by a screw that goes in the side of the door, so securely out of reach when the door is closed. In use it is smooth and locks well. I have found that I cannot unlock it from outside when there is a key in the lock on the inside, which is a security feature from my perspective, having a solid door that cannot be seen through or observed from outside.
M**P
Why do Yale not use standard sizes??
Waste of nearly £15! Ordered what anyone in a hardware shop would agree was the correct size, but when it arrived it was 10mm too long. VERY annoying. Amazon - force Yale to get there sizing sorted or stop selling their products.
C**Y
Good product. Double check measurements
Good build quality and fitting straight forward.As with all Euro locks, it's best to remove your existing lock first and measure. There are two ways euro locks are measured. One was is from front to centre bolt hole and then centre bolt hole to the rear. The other way is from front to start of the center swivelling part (this part turns to engage lock) which has the bolt hole then add 1 cm (10mm) for the swilling part then measure end of swivelling part to the rear. Different manufacturers use different methods for measuring and then retailers may use a different method to the maufacturer!So 40/35 (mm) can be same as 35/10/30Does not come with new bolts so you'll have to re-use old bolt so don't damage the head when removing it. Some of the more expensive Yales come with two new bolts to cater for the two different lengths used on the euro lock doors.
Trustpilot
2 months ago
1 day ago