Furrion Chill Black Conversion Kit for Coleman, Dometic, Advent Air Distribution Boxes with Electrical and Mounting Components, Easy Installation - 2021123542

Well it fit right in no problem quick connect...

This doesn’t convert the ac from an existing dometic unit to the 18btu chill box. I couldn’t find where it states that clearly. Don’t waste your time.

Our Coleman Mach 15 died on us. I found a good deal on a scratch and dent Furrion 14,500 BTU and was looking for an adapter to use our existing thermostat etc.This did the job beautifully. All I needed was the wiring harness. I was able to reuse all my existing parts from the Coleman. In terms of wiring all you do is plug the harness into the connector on the Furrion and plug it into the existing control box from the Coleman. Then a couple of screws to screw in the control box. I had to cut down the foam insulation piece maybe an inch that divides in the air intake from the where the cold air comes out from the Coleman.Of course getting the new AC on the roof and the old one down is the hard part of the job.

Used to install the new furrion AC on a domestic ceiling kit. It worked well.

Had to cut the included bolts 1" per instruction, but this was the easiest install using my existing coleman thermostat and wiring. Plug and play - I used a dremel to cut the bolts, and the rest worked perfectly. I replaced my Coleman Mach 13.5 (48208C969) with a Furrion Chill 15k unit

Nothing wrong with it we just had to send it back didn’t need it

I was very pleased with the product quality, but was very expensive for a plug, 4 metal blocks, which weren't even needed, but you had to purchase the whole kit, just to get the adapter plug.

This was perfect for converting from my old Coleman Mach unit to Furrion. Did not need to use the spacer kit and was able to use the old air handler from my Coleman unit, but the pigtail for the electrical wiring was perfect and made for a super easy install