Ensenior 12 Pack 4 Inch LED Recessed Light, Dimmable, 5000K Daylight, 750LM High Brightness, 9W 120V, Damp Rated, Ultra-Thin Canless Wafer Ceiling Light - ETL & FCC & IC

I recently installed drop ceiling tile covers in our basement to replace/hide those old chalky ones and also replaced old can ceiling lighting which used a big metal housing above the tile.These lights are lightweight, the wiring is easy to connect into the junction box provided and it's literally plug and play. When connecting the wires to the adapter inside the junction box, turning the adapter clockwise while pushing the wire inside makes it very easy. It's in the directions but I didn't read them so it ook me a few times to figure out why the connections weren't holding. To remove the wire, you can't just pull out. You turn counterclockwise while pulling the wire out. Quite simple actually.There is a circle template provide to make exact cuts in the ceiling for the light to fit securely. In my case, to cut holes in the drop ceiling tiles, I bought a Goldblatt G05141 drywall circle cutter and set it to match the dimensions of the circle template. Easy peezy.For every tile covered, I put the old chalky tile on top. For the ones with a light, the chalky board rests on top as well but I didn't attach the light fixture to the chalky board and instead attached to the tile cover itself. The cover is thin plastic so when attached to the old board, the light would press up causing an indention in the plastic tile. The fixtures are light enough to where I attached them to the plastic tile itself using a piece of regalar cardboard for the fixture springs and it doesn't droop. For the junction box, I just placed that on top of the old tile. Hope that made sense.Some reviewers said the lights didn't dim enough. I bought a Lutron DVCL-153P-GR LED+ dimmer switch with a Lutron Claro cover. I don't know if the switch is on the compatibility list or not but there is no buzzing etc. It works great. Inside the switch, there is a dimming adjust "knob". In some rooms, I moved it to the lowest setting and it's very dim with the slider moved to the bottom and bright enough with the slide moved all the way up. For example, when I start my day in the home office, I turn on the lights at very dim and then gradually slide up during the day. For other rooms, I start out at the brightest setting. It's a very nice feature on that switch.For color of light. I'm glad I chose at least 3 options (3/4/5K). I chose to use 4K which I think is a nuetral light. 5K was a bit too harsh and 3K a bit to yellow for my taste. I think if I purchased the fixture with more options, I'd have a hard time making a decision. Lol. The cool thing is that you can easily change the color temp at any time. Example: I'm not sold on the neutral light in a bathroom so I may move the switch to 3K.The lights are more than bright enough and cover a good amount of area.For Customer Service. I cannot say enough kind things about them. One of my lights was missing a spring. The lights come with 2 springs attached to the light. In most cases, especially mine, you need both springs to securely attach the lights to a ceiling. I emailed support, they responded very, very fast. I explained my situation and they sent me out a replacement fixtuee immediately. I don't often get fast responses or resolution from many companies unfortunately.I recently bought an additional 4 pack of these same lights to finish up another room. No issues, they work great just like all the others.It's amazing how much easier these are to install vs those big metal can light fixtures.Hope this review helps others.

You can’t beat these for the price. Easy to install, last for years, and work great.

The media could not be loaded. First of all, I have to say that this product is just excellent and the price is unbeatable. Something that it is important to know is that you need a lot of these because this is a conically directed light. So, they are super bright, but only in a very determined space. If you do your research online, you will find out that there is a determined space in between them. Therefore, for a big room, you will need several. I noticed that at my local hardware store, each one of these was costing in between $20 and $25. When you buy them in bulk, they end up costing between five and seven dollars and even cheaper.No, installation is a breeze as long as you have very basic knowledge of electrical installation and how an electrical circuit works. Excellent performance when paired with a dimmer. I strongly recommend this product.

These lights were purchased based on the high reviews and recommendations from other Amazon buyers. The lights came package very well packaged with protective plastic to protect the led light and foam supporting everything inside the box. The lights were very easy to install, this is my first time installing recess lights which I had to watch a bunch of YouTube videos. The hardest part was removing the old metal can lights in the attic and running the wires. The fun part was cutting all the holes, I bought the ZXHAO 6.1 inch hole saw which cut the perfect hole for the lights. Used 14/2 romex to run all the wires since my breaker was 15 amp. On the electrical box that house all the wires has 3x knock outs, I bought Morris Product 1/2 inch which was the perfect fit, which there was an option to buy less because I still have 80x knock out that I’m not sure what I’ll do with, they only give you an option for 100 quantity. Connecting the romex wires to the box was a breeze, the design of the led light are well thought out and well designed. I’m very satisfied with the overall quality and slick look of the lights. In total I installed 21x of these throughout the house which took me about half the day. I recommend before installing these to map out your are to see the best place you can install them thus saving time.I purchased the LED light with the 3 light setting, 3000k, 4000k, and 5000k. After having the lights set at 4000k they were too bright and had more of a white/blue tent to them, the 5000k was bright as sitting in the Seahawks football stadium, lighting up the whole beautiful 206 neighborhood. I eventually settle with 3000k which was perfect. It had the perfect brightness you would want in a house with a warm feel like your actually in a house and not a garage parking lot or stadium.Again I’m very satisfied with how these lights turned out and I highly recommend it to those looking to upgrade/add sophisticated beautiful lighting to their home. Happy install everyone!

Installed 8 of 12 and kept 4 for future installation or replacement.I my case they were easy to install and provided a much nicer light to the space.

Muy recomendable y de buena calidad

We replaced 2 recessed pot lights with 6 of these and our chandelier in our dining room with another 6. When we turned the lights on for the first time, it was like having a brand new kitchen.They are very simple to install, I have no experience with electrical work, just watched a few videos on YouTube on how to properly install these. They look amazing, and it's nice being able to select the light setting you want, we went with 4500K.Definetly worth the money.

My husband said they installed easily. Let's hope they last longer than the previous ones.

Lights are easy to install and very bright but the junction box is somewhat small and cheap