XXGO 4 Pcs Oscillating Multi Tool Diamond Segment Swing Grit Grout Blades XG4001S

Honestly wasnt expecting much out of these blades. Surprisingly they worked pretty well. Dont get me wrong, there not going to last for multiple jobs, but they did well for this one.

It's good but worn out too fast

For less than half the price of a Milwaukee or similar blade, you get 3. Call it 7 blades for the price of 1. They work well for a bit but wear down. If you have a small job, these are the ticket but for a big project, an expensive blade is more cost effective.I was doing the lower half of my shower and ended up needing the expensive blade because it was going to require a lot of these blades to complete the job.

Removí una cerámica, no tenía que quebrarlas y con esta herramienta fue muy fácil

Worked for removing failing grout. I would have prefrred an offset blade hut this straight blade worked OK.

Tile work had 1/8" spacing and needed to remove some dried thinset from between tiles. Perfect blade for this job. Also worked very well when needing to remove large amount of dried thinset after a few tiles needed to be reset. Key to removing large amount is to use the side of the blade and not the edge.Highly recommended.

I am in the midst of removing the grout on approximately 1000sf of 18" ceramic tiles and regrouting. For the first 300 sf or so I used the semi-circular carbide blades which work but it was taking me forever. I tried one package of these blades and at least doubled my speed on removing the old grout. I think this is for at least two reasons. First, the "rocker" style blade means you can get more blade on the grout at any one time while the semi-circular blade only touches a small portion. The second part of the reason is the the shaft of the blade allows for a greater distance between the blade and my oscillating power tool. These gives me greater flexibility on how I position the tool as I go over the grout line; the smaller semi-circular blades don't allow for nearly as much room for changing the tool position. I am changing the blades at the same time frequency as I was with the carbide blades but covering roughly twice the distance in about 1/2 the time.Before I started this project I watched every Youtube video I could find on grout removal which helped a bit. However, I've found a couple techniques which help me go faster, particularly with these blades. First I go down one side of the grout line hugging the blade against the side of the tile and rocking back a little so that the side of the tile where I've already removed some of the grout acts as a stabilizer for guiding the tool. I go back and forth 2-3 times getting the depth to approximately what I want. I then cut the grout on the other side of the line the same way. By making the first cut deep enough, some of the grout will come out in long pieces as I am cutting the second line. This makes the project go faster for the portions that comes out in small chunks rather than having to grind everything out. Hope this helps.

I bought a $20 diamond blade from a local hardware store but these blades from Amazon are lasting about 5 times longer and were way cheaper. I would use these again.

Good shape and good value but wore out very quickly on porcelain tiles

These are just brilliant for grout removal,,quicker than the round ones by 75% ,,I had to remove grout in a tiled floor with a 4mm gap ...speeded up the process by putting 2 of these together in the multi tool for the wide gap, they create a load of fine dust,make sure you wear eye protection and a good rated Mask Respirator

Solved a problem

Quick delivery and the item in accordance with the description

Removed old grout from around a shower. I found that it was best to use the front curve to score a line into the grout first rather than the ends of the tool as there is too much vibration and the tool can jump onto the tile. I only used one of the set of 3 so was pleased it lasted but the gout was only about 2mm wide. Only downside is it doesn’t get right into the corners of the wall so suggest a triangular one for that.