Digital Temperature Meter

Very good temperature meter and probe. Accurate and stable readings. Great price. Easy to connect and use.

This is one of the only kind of it's type. There are so few LED readout thermometers that show up. If you buy it for using a sensor, you'll want to get a much bigger, stainless steel cable/sensor ..., screw on wire leads. Most of all, this thing defies the odds on being accurate, but with a 18-22 inch wire with a larger, stainless steel sensor, it can be put further away from the thermometer housing.

Good display and pretty accurate (compared to a lab calibrated thermometer). The only issue is the uneven brightness of the segments. It's bright but not very. I powered it with a 12V 300mA supply, which should be plenty.

Great little sensor. You may need to insulate the probe and threads if installing in metal duct. Wire heat shrink works well for this. Works great to help me make sure my diesel heater isn’t cooking my duct fans.

First, I do not really leave any reviews but I was compelled to do so here. I need a device to be accurate. After reading some of the reviews and testing this device in a real world industrial environment. They either got a bad device or what they tested it against was faulty. I'm sold on this little critter. The proof is in the pudding as they say. I tested it along side a Honeywell 3500 and against a heat up company's device. I let it go for days without a single issue. If you need accurate this one is it. I hope my review helps you all.

The device does EXACTLY what it claims to do. This K-type thermocouple was EASY to install. Forgive the mess on this ALMOST complete solar power station.

Absolutely a game changer for monitoring a wood stove flu temperature. I have a big wood stove add-on that blows hot air into my cabin. I have always used a magnetic thermometer, which I now know is a big mistake. This little digital thermocouple is way more accurate, my flu temp was 450° F when the magnetic thermometer was just hitting 300° F. It very accurately shows the flu temperature response to the slightest change in the flu damper and air intake. When the fan blower came on it correctly showed the flue temperature dropping. And best of all I can now monitor the flu temperature from inside my cabin.

Not Accurate at all. Wildly fluctuating temp readings. Initial power up shows temp +/- 3 degrees f... then temp will incrementally climb, then hang at 40+degrees above ambient temp, then drop incrementally. I've tried 3 different K t-couples, and 2 different J t-couples .. and finally twisted pair - 22awg wires tired together -- no change in temp reading, all different lengths, nothing reads accurate. Temp on meter does not match Laser Temp or Fluke Temp Probe. very disappointing, all I needed was to read ambient outside air. **Sigh**

Received in good time. Installed in my project, and works great. Thank you.