Sport Marine SE Sport 200 High Performance Hydrofoil for 8-40HP Motors, Gray

It's not compatible with a 2024 Suzuki 9.9/15/20 HP engine. The only way I can see to correctly mount it on the cavitation plate is to drop the lower unit, there's no room to drill straight down for proper installation.A great looking product and I'm sure it works as advertised.I've got some mechanic friends and will see if they can come up with a solution for installing it.

Nice fit my 14 foot boat planes faster and added 3 MPh

I recently renovated a 1973 Starcraft that has a 20 hp mercury motor. First trial after installing and as I increased the throttle the nose would go up so I couldn't see and it was tough to get on plane. I'd open the throttle up all the way and the boat would get up to about 25-26 mph, but very quickly the boat would start porpoising.I was really nervous installing this. There's a few quick videos that show how to install the foil. The template was really helpful. Even with that my holes were slightly off, but the foil was forgiving and fit like a glove. Took less than 20 minutes to install.Now boat gets up on plane very easily, handles much smoother, I lost 1 or 2 mph on the top end, but no more porpoising. It did the job it was supposed to.

I don't know how well this will work in my application as I won't be able to try it out for a while. However, as far as the quality of the product goes, I like it very well 👍. The price is not horrible either.In case anyone was wondering, I mounted this to a 6hp tohatsu. Now, it dosen't fit this motor out of the package. It required a bit of fairly simple modification. The throat of the foil is too narrow to fit around the lower unit. But using a contour guage, a coping saw and a drum sander, I was able to make it fit like a glove, almost factory in fact. If anyone would like details on the procedure let me know. I also didn't use the factory holes. I had to put the holes in the cavitation plate where it made sense for the motor and I drilled new holes in the foil. For the 6hp tohatsu, your going to have to drill at least two new holes in the foil. I drilled 4 but in hindsight I think I'd have tried for only 2. At any rate, I got it mounted in about a hour and a half start to finish and I am very pleased with how it turned out. Just know it's not going to fit tohatsu 4,5,6 hp motors without modification.Update:So I use this 6hp on the back of my flat back canoe. Does this foil work for my particular application? After all, I'm trying to help bring the nose of the canoe down when I'm the only passenger in the boat. Let's put it this way. I don't hurt. I've tried trimming the motor a bit in addition to this foil. In the end, I end up filling a 7 gallon plastic water jug and placing it in the front of the canoe. With the trim setting, the foil and the 7 gallon water jug, the canoe planes very nicely and skips along real nice like. How MUCH of this is down to the foil is hard to say. I don't want to take it off the motor to test it out. But like I said, it certainly doesn't hurt. The foil almost certainly eats away at the top end speed due to drag. I get 10mph out of a 6hp motor with stock propeller on a 12' sportsman flatback canoe with carrying 450 lbs (which includes myself). Not horrible as far as canoes go, but you're not going to win any water speed records.The foil probably DOES help to plane the Canoe, though it's not "THEE" solution all by itself. But I strongly suspect that there is another benefit that I hadn't figured on. I sincerely expected the Canoe to be far more, squirrely and unstable than it is. As a matter of fact, at 5 to 10 MPH speeds, the canoe seems to handle exceptionally well. Way better than I could have hoped for. It's very stable and confidence inducing. The canoe feels very well planted and I can't help but think that foil has something to do with just how stable it feels. Again, I'm not removing the foil to test things out. It's difficult to quantify just how much the foil is doing for me. I suspect it helps with planning. I suspect it helps with stability at speed. And, I suspect it gobbles up at least a couple MPH on the top end. The only thing I can say with confidence is that the foil doesn't make the canoe handle poorly at all. So on the whole, I think I'm satisfied with it and I can't see any reason currently not to get one.Time will tell if it actually works.

works as described, strong and helps the boat plane out, easy install, great product, would buy again

Put on a Yamaha F40hp outboard mounted on a 13' Boston Whaler. Greatly helped boat get up on plane and don't think it slowed it down. Boat ran 41.5 mph with one person and 2 tanks of gas. Great addition to the boat.

I just installed this on my 15hp Yamaha. The Dinghy went from a turtle to a cheetah on plane. Love it!

I’m not sure how well this works yet. I am still trying to get it installed. The bolts that come with it are junk. Why use a Phillips head bolt on this? They all stripped out and now I have to drill them all out and replace with some good bolts with socket heads. Do yourself a favor and replace the bolts before you try to install it.