Linkind MR16 LED Bulb Dimmable, GU5.3 Bi-Pin Base LED Light Bulbs, 6.5W (70W Equivalent) 3000K Warm White 640lm MR16 LED Spot Lights, Recessed, Tracking Lights, 12V Low Voltage, 6 Packs

I’ve been using the Linkind MR16 LED bulbs for a few weeks now, and they have exceeded my expectations. These bulbs are an excellent replacement for traditional halogen bulbs, offering a brighter, more energy-efficient lighting solution. The color temperature is spot-on, providing a crisp, clear light that works perfectly in my living room and kitchen. The dimmable feature is smooth, allowing for a wide range of brightness levels without any flickering. This is great for adjusting the ambiance in different rooms. Installation was a breeze thanks to the standard GU5.3 bi-pin base, and they fit perfectly into my existing light fixtures. What I love most is their energy efficiency—I’ve noticed a reduction in my energy consumption compared to the halogens I had before. These bulbs also run much cooler, which is a nice bonus in terms of safety and longevity. Overall, the Linkind MR16 LED bulbs are a fantastic choice if you’re looking for reliable, dimmable, and energy-saving lighting. Highly recommended!

Very good quality bulb. Super bright and daylight white. I use them as up lights at the base of my trees. I put in a couple of them about a year ago. They look so good and the bulbs seem to last a long time I decided to add more. Super happy with them and highly recommend!!

Bought these to replace the 50W halogens in my kitchen ceiling 'track' light fixture. I was going to go one by one as they burnt out, but the glaringly obvious difference made me just replace them all in one shot. With that said, they perform their function admirably with no technical issues at all. The dim perfectly with my Z-Wave wall dimmer with no flicker or trouble at all. The are bright, warm, and aim well, with a bit more 'projection' than the halogens had (they had a bit more spread and a softer gradient at the edges). The only complaints one might have is just an effect of the technology. Halogens allow light to 'bleed' out the back of the casing, so if you have transparent housings, they illuminate the ceiling a little, giving you some extra light bouncing off. LEDs like this only project from the front, so immediately the upper portion of the kitchen looked a bit darker from the lack of backlighting. Honestly, a few days later and it looks just fine to the eye. It just makes me want to add backsplash LED lighting and over-cabinet lighting. I DID have to change the aim of my lights since they are a bit more narrow and 'direct' as far as their effective light 'cone' goes. The second effect is that they do not get warmer when dimmed as halogens do. They stay the same temperature throughout the range of dimming. Again, this is just how LEDs are going to work and once used to it, it's not a big deal. This is definitely worth dropping consumption from 200W to <20W for something that stays on quite often, though! Just be prepared for technology differences when switching from halogens.

I had to replace 6 GU10's in 2 different ceiling fan/light combos. One room is just on a switch and the other is on a pair of dimmers separating the fan/light. These lights are super bright and a great replacement for the standard bulbs they replaced, running much cooler. It's listed as 'Soft White" but I'd say it's really a great neutral white, not dingy yellow but no traces of blue either, just a really clean white light. I docked a star because they work great in the switched light, but not so much in the dimmer controlled fixture. They tend to flicker every couple of seconds, usually if I make sure the dimmer is all the way up it's fine, but it's even a hair away from max the lights will start flickering.

As best I can tell, these are the best and brightest bulbs for low voltage LED MR16, GU5.3. Most competitors offer 50 watt equivalents 500 lumens. These are considerably brighter and a good price point. I tried one other option from a different company (Wei), but that bulb’s light was too yellow.

These Linkind MR16 LED bulbs are exactly what I needed. They’re super bright, but not harsh, and the color is crisp and natural. I was pleasantly surprised by how smooth the dimming function is—no flickering or buzzing, just clean transitions from bright to soft light. They were a perfect fit for my recessed fixtures, and they run cool to the touch, unlike the halogens I replaced. Energy-efficient, long-lasting, and great quality for the price—I’ll definitely be buying more for the rest of the house!

If you don't need a dimmer, these bulbs seem OK. However, I could not find any way to use the dimmability feature. I used them to replace incandescent bulbs in my track lighting. They did not work with the dimmer I had in place, so I looked for a compatible one. However, when I called customer service, the rep could not provide the name of a compatible dimmer, and this brand does not show up on the compatibility lists of the dimmer companies I checked (including Lutron). One rep said that I could use the AiDOT app to dim them, but that didn't work either, and when I called to ask about that, that new rep said that the app did not work with these bulbs. Very disappointing.

We decided to replace our halogen bulbs to save energy, and these bulbs nicely fit the bill. They cast a pleasing light - soft enough not to seem at all like LED. Highly recommended!

Bon rapport qualité prix

Exactly what I am looking for, 3000K, but I wish it could be a little brighter, like 800 LM, that would be perfect.

excelente

n/a

Not the brightest and one already died. Narrow angle too.