electrosmart Pair of 2 Pin Din Female HiFi Loud Speaker Cable Plugs with Screw Connections

these are good for the price works well

Very handy for an old type connection

They do the job as intended and hold my two pin speakers connections securely. They could do with have a + / - or and indication of some kind to let you know which wire goes in which connection but other than that all good.

It’s what I needed

The parts of the connector that form the receptacles and the parts that have the screws to clamp the wires are separate, connected by a rivet. Every rivet was so loose the metal parts were free to move around and not make contact between the wire clamps and connector receptacles. In my case I fixed this by disassembling each connector entirely and soldering around the rivet while holding the connector parts together at the right angle. This re-manufacturing clearly should not be necessary, and somewhat defeats the "no soldering" claim made.The plastic mouldings are badly formed also; I cleaned them up by cutting off the excess plastic "flashing" with flush side cutters.These connectors are clearly a bad copy of a proper one, made by some organisation that have no idea how to make things properly, or how electricity and connectors even work.

Dont get me wrong, they do the job and do it well, but they are cheap and one socket would not allow a plug to be inserted fully due to a defect in the plastic moulding. Needed to be cut to allow the spade to fit fully home.But they do the job, but might be worth ordering a few more than you need.

I bought these, one had screws that wouldn’t tighten, the male and female would not go together. Luckily they come in 2’s as I managed to make one good one but not happy as I still had a gap between the two parts.

not working