CLOUDY BAY 4 inch 3000K/4000K/5000K Three Color Temperature Selectable, Dimmable 10W CRI 90+,Ultra Thin Recessed Downlight with Junction Box, Canless Wafer Down Light, Damp Location,White Finish, 6PK

I bought these over identical-looking competing products for 3 main reasons: Available in 6pkwhile many competing products are only 8/12pk (I only needed 3) , the option of 3 colors, and good value in terms of price per unit.Installation in general is pretty easy. Remove the number of punch-outs you need from the control box, install 3/8" NM clamps (not included), run the Romex wire through them, and wire it up using the included wire nuts. Then push the box up into the hole. It does have screw holes for securing it if you want, but most people (myself included) don't bother. Then plug in the light, position the spring clips where they will go into the hole, and pop it in. I replaced a couple flush-mount "boob lights" with these, so there was a bit more work involved in cutting out the original junction boxes, but once the junction boxes were removed (4" round type), I was left with the perfect sized hole for these to pop right into. At least, that was the case with my upstairs hallway. My basement hallway was built by the homeowner, and his junction box hole was a lot more sloppy, so I did have to do a bit of trimming to get the hole right. I didn't have to worry about thickness since mine went into existing junction box holes, but they're very thin. They would definitely clear any joists in 1/2" drywall if you need them to.After installation, they look great! I love the clean, flat look. They were also surprisingly bright. The old "boob lights" had 15W (60W equiv) CFL in them that were supposed to be 800-Lumens. These at 650-Lumens are significantly brighter. It seemed a little too bright at first for a hallway, but I've gotten used to it and it feels just right now. The only minor complaint I have, is between the 2 in the upstairs hallway, both set to 4000K, one is noticeably warmer than the other. However, it's not annoying enough to make me want to go to the trouble to try swapping out the lights and/or control box, especially since wiring the upstairs ones was made a bit difficult since the builder of my house secured all the wiring to the ceiling joists leaving me with very little slack to work with. I didn't ding them a star because I'd say I'm 95% happy with them and very glad I went for these 4" recessed rather than just nicer looking flush mount fixtures.

Amazing value for the money. Easy to install. Can be tricky to get grouped, but once they are its awesome.

Minimalist and easy to install.

Great lights. Very easy and clean to install. Sure beats the hight hat cans

I have had these lights for about 2 years and a couple died. I sent one email with the proof of purchase in my Amazon past sales, and they shipped replacements right out. Excellent job handling an issue, I was not even sure that it was under any warranty.

I purchased these lights to install in my garage. Because these are controllable by an app, I assume they could be hardwired always-on. But, in order to pair them with your app, you need to have them wired to a switch. So, read all the directions before you start pulling wire.After wiring in a switch and toggling three times, they all paired. My WiFi isn’t great, but all six lights paired. Compatibility with google home is a bonus. They are bright and responsive. Perfect for working in the garage.I also liked the push nut connections. I found them secure and tidy.Great product.

replaced white ones that I installed a year ago, love the color options , app works well, connected to the 2.4 GHTZ WiFi just fine, firm ware updated. They are working well for now.

They are a great value until you factor in the cost of having them ripped out and another brand installed. There is a buzzing from them, like a glass harp. It is coming out several of the 15 I had installed. I'm surprised; they were rated so well. I got such a good deal, that I had a great feeling about them, but this has been a disaster.Update: I thought since they were set to full power and brightness out of the box, I could adjust those things and problem solved. Wrong after setting to 50% power and a warmer color buzzing remained. I finally managed to get the lights to stop buzzing, but only after I turned them to orange, purple, or blue. So only Friday night lighting.FYI the lights were put on a new circuit using new 12 gauge wire and new breaker, that was ran to a new main panel we installed less than a year ago. My contractor thought it was the lights and not the box. He said he could feel them vibrating. I could not but I will try switching the lights with some replacements Amazon sent.The app wants to know your location and if you refuse, it will add a pop up every single time you select a light to adjust anything. After added Alexa not a problem, but super annoying on startup.