Illuminate Your Drive! 🚗✨
The LASFITT3 7443 Switchback LED Bulb is designed specifically for the 2024-2025 Toyota Tacoma, offering a seamless, error-free installation with a built-in resistor. With a remarkable brightness of 4000 lumens and a lifespan of 30,000 hours, these bulbs provide both safety and longevity. The quick installation process and dedicated customer support make this product a must-have for any Tacoma owner looking to enhance their vehicle's lighting.
Wattage | 24 watts |
Color | Switchback(Amber/White ) |
Voltage | 12 Volts |
Fit Type | Universal Fit |
Color Temperature | 3000 Kelvin |
Specific Uses For Product | Indicator Light |
Package Quantity | 1 |
D**C
2020 Camry Hybrid SE - Update 30-Jul-21
Update (2-Aug-21): I contacted Lasfit's customer service and they were extremely helpful. They have sent a replacement set to me and I cannot wait to get them back in my car.Update (30-Jul-21): Unfortunately one of the bulbs has "burned out" and stopped working entirely only after 7 months. While they were working they were amazing but I just got in the car this morning and the one side just didn't work at all. Just wish they had the longevity.Ordered these because I wanted to have the nice switchback option from white to the amber signal light when engaged on the front of the car. Install only took minutes, a good trick I saw on the Lasfit site was use your key fob to lock the doors and ping the lights to make sure you have the correct polarity before putting back in. The white color is great, nice and bright and matches the headlights now. The amber signal light is SUPER bright, I'm a little nervous I might be angering some of the drivers around me but they can at least see where I'm going. I was fearful about the hyperflash but so far so good. I tested with the signals flashing for 3+ minutes when first installed and no hyperflash. I've waited at some significantly long traffic lights and so far so good. It's also the winter time so I will reserve the 5th star to see if they hold up in the heat of the summer without hyperflash. But so far these are awesome.
S**
Cool as ice
This light bulb matches my oem headlights on my 2024 Tacoma. Looks uniform across from left to right. Easy install. It is a bit brighter for the amber turn signals which is good considering a lot of the street lights have been out where I live.
R**Z
Great led upgrade!
Great product!
T**N
These are legit!
Got these for my friends 2015 Camry turn signal lights. The old halogens went out so we replaced with led Amber bulbs. But it caused the signals to hyper flash or blink too fast. Then we bought plug in resistors but the plug wouldn't tab into the socket.Then we saw a YouTube video about these switchback LEDs with no resistor required and no hyper flashing. Finally we said F it and got these. They are a little expensive but almost the same price if you bought regular led bulbs + resistors. These are legit bro! No need to mess with hyper flashing or wire cutting or resistors as the resister are built-in. Well worth the price!Wish we took pics. But the light is white when on and switch back to Amber and white for the turn signals. Get these!
F**N
Bright, but only half work on 2012 RAV4
[Long term update!]I purchased these bulbs 9 months ago, and during that time I have noticed that the switchback portion causes hyperflashing after 60-or-so seconds of turn signals use. This is due to the resistors being overheated and therefore not working properly. I’d advise you to install your own resistor if you plan on purchasing this, or going with a cheaper LED that does not have a defective/cheaply made resistor built in.TLDR: Go with a regular switchback amber/amber or white/amber, as well as a separate resistor. (if your lens is clear, get white/amber, if your lens is amber, get amber/amber. thank me later.)Revised review after 9 months of use:The built-in resistor is defective, and I would avoid using this white/amber color if you have amber glass covering the light bulb, such as the lens in the 2012 RAV4 of mine. The OEM incandescent/halogen clear bulbs burn through as amber, however, the cool-white tone light of the LEDs on this burn through as an unnatural, unappealing yellow color. The turn signals are extremely bright and very amber, however.
J**L
Work on 23 Tacoma, kind of.
This work perfectly at night, head lights on but not during the day. No DRL and rapid flash. Is there a way to make em work for day time?
S**R
Good fit easy to install
Just installed the bulbs they look good and there very bright. Very nice look. Hopefully they last long enough to enjoy them.
J**A
Compatibility
Worked as stated.
E**E
Super bright
Work perfectly and bright as heck .really nice ....
J**N
Just got them but...
So far so good. Nice and bright, no need for resistors with my 2015 Chevrolet Volt.
D**N
I’ve waited for these to arrive
Shopped around looking for the best aftermarket turn signal for a 2022 4Runner. I finally settled with these and they do not disappoint. Great bright led
S**C
The amber is bright!
The switch back feature changes the look of the lights. The marker is white and the turn signal is amber.The amber is very bright, definitely brighter than the incandescent bulb. However the white led for the marker is not as bright. I hope Lasfit will improve upon the white led to make them brighter. Overall very happy with the switchback bulb!
A**.
Got the fast blink in a long waiting left turn
The media could not be loaded. Not sure if there is an issue with these bulbs if the turn signal is left on for awhile. Sitting at a long left turn (due to traffic and failed set of lights), my blinker started blinking abnormally fast. Temp outside was 12°C and vehicle had been running for less than 15 mins, so ambient overheating is not the issue. Been installed for a week, and first time it’s done that. If it occurs again, I’ll ask for a replacement bulb. Other than this issue which isn’t supposed to occur as per their marketing, the colour and brightness are great (‘22 Toyota 4Runner).
Trustpilot
2 weeks ago
1 week ago