Victor's Air Tank Manifold will hold the internal pressure of most air tanks. Features sturdy brass construction.
R**S
Operating limits NOT stated or even apparently available
Similar to most, but with a feature better than others, is the separate inlet and valve. Many have these integrated so that they fail together or on each other. BUT, this unit does NOT state at what pressure the relief valve actuates, and while most such tanks are rated at 125 PSI MAWP (Maximum Allowable Working Pressure), it seems that THIS valve wants to relieve at only 100 PSI. Also, you should note that simply using tetflon tape on this size connection is almost always going to leak because of its size and do yourself a favor by having a good thread seal compound on hand before...
B**F
I now know why it gets low ratings!
The threads for the gauge were somehow defective. I could not screw the gauge in making the manifold useless. Of course Amazon replaced it but it was a great inconvenience. I wish I had paid attention to the low rating of this item before I bought it. Very poor quality control
W**H
Awful
Waste of $, and I cannot get it back because it took me > 30 days to get the other fittings I needed to make this work with my existing setup.First of all, the plastic knob for operating the valve rounded out the very FIRST time I tried to use it. On top of that the pressure relief valve was only maintaining my 125 psi tank at 75 psi when I gave up and put the tank away - who knows maybe it is not even holding that much. I knew it was a gamble as there was no rating in the specs; I would have expected at least 100 psi.
D**E
High quality replacement
This replacement valve was a perfect fit on my air tank. It is completely air tight, stops leakage and provides a high level of controllability. My highest expectations were met.
J**H
my tank still leaks
this is the same one i ordered from aparts store and have the same problem with both of them no matter what i do they still leak air so i will just get rid of tank
G**N
Produced a more useable air tank.
This manifold, along with a new hose, gage and chuck, helped me salvage a service tank that had seen better days. Now retains pressure for a very long time.
A**R
tapped pressure gauge hole.
The pressure gauge port is a 1/8"-27 NPT threaded hole and is not threaded deep enough. Being tapered it only allowed pressure gauge to engage only1/2 of a turn. I re-tapped the hole with a 1/8-27 NPT tap and ran a 1/8-27 NPT die over the gage threads. Tap and die removed some material and am now able to get three full turns.
A**R
not something you want poor quallity
After 70 psi it leaks. Not a high quality product. Look elsewhere. Buy one for your enemy so they can waste a lot of time installing it and be unhappy.
Trustpilot
1 month ago
1 month ago