🔧 Elevate Your Projects with Premium Precision!
This package includes four 1/2" inch premium zinc plated carbon steel knurled drop-in anchors, designed for use with 1/2-13 bolts. With a hole depth of 2" and a diameter of 5/8", these anchors are ideal for solid concrete applications. The zinc CR+3 plating ensures corrosion resistance, and the product is RoHS compliant, making it a reliable choice for both professional and DIY projects.
R**Y
Easy to use and holds well
Just make sure to get the holes straight when you drill them, and make sure to tighten bolts down really well so that it expands these anchors. I mounted a manual tire machine from HFT on the garage floor, and then I bought some carriage bolts and cut a slot in the top so I can use a screwdriver to tighten them up. Those are not the bolt normally use, of course! I’m just using them to cover up the holes so I don’t get garbage in my anchors while I’m not using my tire machine and there’s not an exposed hex bolt head to trip over like if I used regular bolts. When I want to use my machine, I take the carriage bolts out with the screwdriver, put the machine down, and tighten it down with the real bolts. Anyway, these anchors have been great.
J**C
Work great
Drilled the 5/8" holes in cement just deep enough so they were just barely under the surface, used a smaller bolt and a heavy hammer to 'set' them by beating the plug in them down hard. It was easy and they seem to be sturdy! Using for my harbor freight tire changer.
S**Y
Did the job for mounting a tire changer to a concrete floor.
I used these to mount a manual tire changer in the garage. Now I can bolt it down securely in an area with plenty of room to work, and then quickly unbolt it and move it into a corner when not being used. The toughest part of the installation of the anchors was drilling, but a good bit and hammer drill will get the job done. I bought the tool to install anchors and it was easy to hammer them in place securely.
H**R
good product
Great shipping, item looks good, will know more after installation and use. Thanks!
K**S
Shoved into concrete, holding on like scorned ex lover!!!
These bad boys are tough. Used them for a manual tire changer that was modified to take 22" truck rims. Held on and asked for more!!!
J**M
snapped off
Trying to install a manual tire changer in garage floor. When tightening the 1/2" bolt into it the anchor broke in two when it was down in the drilled hole.
J**J
Good strong anchors, that don’t stick up past floor level
Put the safe in place, drill through the holes, drop in the anchors and tighten the bolts.
W**6
Worked like it’s supposed to….
I anchored my tire changer to the garage floor with these so that I wouldn’t have anything sticking out of the floor when I’m not useing it…
Trustpilot
1 month ago
1 day ago