GameMax F15G Glass Mid-Tower ATX PC Gaming Case ARGB, Tempered Glass, ARGB Hub included | Black

F15G (glass fronted version), bought from CCL computers, for just under £75.I was expecting delivery in 4 to 7 days, but it arrived in only 2 days & in perfect condition, so top marks to CCL for that.It took me about 3 or 4 hours to dismantle my pc and install it all in this new case.The first thing to say is, it fired up successfully first time and it looks awesome!Secondly, I cannot believe how whisper quiet it is with 3 fans going, and it's barely any louder at the higher speed. My old case had two 120mm fans and it was pretty loud, so that's a bonus I was not expecting.The overall build quality is excellent, with just one exception, and that has been mentioned in other reviews - the thumb screws feel like they could sheer in their thread if you are too heavy handed. BUT there is no need to be too forceful , just carefully tighten them without over-doing it, and they are fine. Otherwise the case is rugged, with a high quality tempered glass side panel and smart looking glass front with mesh strips down each side.There was no manual, but I just made note of which sata sockets each of my drives was plugged into on the motherboard, (just to make sure that my C drive didn't suddenly become the F drive) and then took my time dismantling and re-assembling it all in the same sockets, in the new case.There is a large variety of light settings, from static to flashing to rainbow - you can either scroll through them one by one (I count about 62 variations!), or use the Quick buttons on the remote to move to particular ones. I have not tried to sync it with the motherboard. For one thing I'm not sure my Gigabyte Z390 Gaming X is actually compatible for controlling the lights, and in any case, I'm really not bothered - the fans and lights operate quietly enough to run as soon as the power is switched on, & I'm happy to select colours using the remote, so I have no need to sync it.Most importantly, there is good airflow through the case, with scope for more fans/coolers if ever they are needed, or if more bright lights are wanted.Also, there's plenty of space for GPUs up to 36cm+, so the Nvidia 3000 series cards will fit.I'm very happy with this purchase, it feels like very good quality for a reasonable price, and turns my pc into a good looking piece of 'furniture' instead of a scruffy computer case.

Well I bit the bullet and splashed out on some components for a new multipurpose/gaming PC. I was able to reuse some items from my son's recently upgraded machine, namely the PSU, a 500w EVGA, and the GPU, an old but still useful gigabyte gtx1060.I ended up ordering a case, a motherboard, some ram, a CPU and an SSD.For the case, I wanted something with lots of airflow in order to keep the components inside cool. My previous desktop pc was built inside a Lian Li case which was considered high end for the time, but it had 2x80mm fans at the front,1 at the top and 1 at the rear. I know it sounds insane these days but back then airflow wasn't a big thing yet, case construction materials were more important. I'm pretty sure a decent 120mm fan these days pushes more air than all those old fans combined, and whilst not too noisy they had to spin quite fast to get the air moving alongWell, I saw this case on a YouTube channel called Mike's unboxing and reviews. It looks a little like one of the Cooler Master H500 series cases, which also have 2 200mm RGB fans and a mesh front for almost unimpeded airflow to the case's innards. This allows the fans to spin slower, and thus quieter, since they are much bigger than the more common 120mm fans on most cases, this case does have a 120mm fan on the rear for the exhaust. Oh, and most fun... all the fans are ARGB, so yeah, unicorn puke should you desire.There's lots of room to build in, even for those with sausage fingers. Lots of cutouts all over the main tray to route the cables, no grommets but that's not a big problem. Lots of tie down points to make cable management easy/less hard.The PSU sits in its own compartment at the bottom thanks to the perforated shroud which has space for 2x2.5" drives or 1x3.5" drives thanks to a detachable drive sled. A similar sled on the back of the motherboard tray adds 1 or 2 more drives and in front of the PSU is an actual drive cage for 2 more 3.5" drives, or 1 of each size. So in theory the case can hold up to 6 drives as standard. I have seen drive mount adapters which convert 3.5" mounts to twin 2.5" mounts so you COULD fit 8 2.5" drives!So. Large spacious case, easy component installation, easy cable management, drive mounts galore, not too expensive. What more... Oh yes, RGB! Great case, highly recommended.

This has got to be the best case I've ever had. Its so easy to work in, loads of air flow and the rgb fans are good quality. Theres magnetic dust filters too to keep the inside clean. Its just a matter of removing them and vacuuming them clean. I opted for the front mesh version for the extra air flow but the tempered glass front one also looks good. I was surprised at the quality for this price. Everything is nicely painted and the tempered glass side is excellent quality. The cable management is really good with plenty of holes to feed the cables through. I have a large graphics card (triple fanned) and this easily fits inside. You will not regret buying this case. There is also a rgb fan hub that accepts aura connected case fans. Ive also added 2 120mm fans (aura connectors) in the top to take more warm air out of the case. The remote works well with the rgb lighting with some nice effects.

Es argb totalmente configurable al color que quieras en mi caso está en azul la caja lleva un hub donde puedes poner más ventiladores compatibles con la conexión evidentemente va todo controlado con un mando y con un botón que tiene en la parte superior de la caja o conectándolo a tu placa base si está lo permite (en mi caso no es así yo lo controlo con el mando ) ,el tamaño de la caja es amplio mi placa base es atx (como se ve en la foto es una placa grande )pero está caja te da la oportunidad de aún poner el formato extended atx qué es aún más grande ,respecto al espacio para la gráfica más de lo mismo creo que entra cualquier gráfica del mercado sin problemas (tengo una gtx1080 del fabricante palit,son las 1080 más grandes de mercado ) y sin problemas ,la rejilla superior viene con un filtro que se sujeta por imanes al igual que en el frontal y es ideal para poner la refrigeración líquida respecto a discos duros tengo 3 de 3,5 (de los grandes ) i 2 SSD y aún entra alguno más , en resumen es una caja de calidad tiene buenos acabado y buenos materiales de contruccion por el precio que me costó a mí ,cerca de los 90 euros merece la pena , yo tenía miedo ya que estaba mirando cajas de marcas reconocidas con similares características a un precio bastante superior al final me decante por esta y no me defraudó ,tanto incluso que la recomendé a un amigo ,cómo dato final te dire que el panel trasero (donde van las gráficas i dispositivos PCI tiene la opción de ponerse en vertical por si quieres poner tu gráfica en vertical

Couldn't be more impressed with this PC case. The two giant fans on the front are crazy! Definitely worth it. Don't think twice about it.

Un case abbastanza economico (circa 80 euro) ma di buona fattura. Dotato di due ventoloni frontali da 200mm argb in immissione e una ventola da 120 mm in estrazione anch'essa argb, tutte abbastanza silenziose e che garantiscono un buon airflow. Molto facile l'installazione dei componenti, anche per chi, come me, si cimenta per la prima volta nell'assemblaggio del pc. Pratico l'hub per il collegamento delle ventole (anche aggiuntive se necessario), regolabili nei colori sia dal software scheda madre, sia dal telecomando in dotazione. Facile il cable management grazie al buono spazio all'interno del pannello posteriore.Solo un paio di piccoli difetti:- il filtro antipolvere sul fondo non è magnetico ma con una soluzione meno pratica a incastro/scorrimento attraverso delle guide.- all'interno della confezione non c'è un foglietto con le istruzioni, e quello scaricabile dal sito del produttore è un file jpeg a risoluzione così bassa da risultare illeggibile.

Das GameMax F15 ähnelt dem Lian Li Lancool 215 stark, ist aber besser ausgestattet. Der vorinstallierte120 mm Lüfter im Heck ist bei Lian Li kein aRGB-Lüfter. Ebenso fehlt beim Lian Li der magnetische Staubfilter hinter den beiden großen, ebenfalls vorinstallierten Frontlüftern, genauso, wie die aRGB-Lüftersteuerung, die sich über kompatible Mainboards oder die mitgelieferte Fernbedienung realisieren lässt. Das GameMax F15 ist solide verarbeitet und bietet ausreichend Durchführungen für ein sinnvolles Kabelmanagement. Bei der Länge der Grafikkarte gibt es keine Einschränkung durch störende Festplattenkäfige o. ä.. Lediglich die Höhe eines Turmkühlers für die CPU ist durch die Breite des Gehäuses limitiert. Kühler bis zu einer Höhe von ca. 160 mm sind jedoch kein Problem. Insgesamt ein sehr empfehlenswertes Midi-Tower-Gehäuse, dass durch die Meshfront, ebenso wie Rückseite und Deckel und die Staubfilter für ein gut belüftetes, sauberes System sorgt. Ein Kit zum vertikalen Einbau der Grafikkarte ist auch dabei. Das ist aber bei Installation eines Turmkühlers nicht realisierbar. Ein sehr empfehlenswertes Midi-Tower-Gehäuse.

la esperaba con miedo porque despues de comprarla en el titular del producto decia de 3 ventiladores de 120mm en lugar de los 2 frontales de 200 y el trasero de 120 que se ven en las fotos, fue lo primero que mire al recibirla y alli estaban los 2 enormes ventiladores en el frontal, incluye un mado a distancia.de momento no la he montado con lo cual no puedo opinar mas pero se ve de calidad, incorpora tornilleria y soporte para poner la grafica en vertical (no el cable)