JETech Case for iPad Pro 12.9" 2nd/1st Gen (2017/2015), Black

Okay, so first of all I have owned every generation of iPad. So, I have had quite a few. Each iPad I purchase I put an InvisibleShield on it and over time using various expensive cases the InvisibleShield has to be replaced guaranteed. Cases I have purchased before are the $99, $129, $150 dollar cases from name brand makers. I have also purchased Apple brand cases for the iPad Air. When I purchased my iPad Pro 12.9 there wasn't too many choices in iPad cases at the time. An InvisibleShield costs $65 so really I was looking for a case to perform as intended without affecting the InvisibleShield and without obstructing the connection ports that is durable. I came across this iPad case which by all standards looks like an official Apple brand case at a fraction of the cost. I decided to try it, the investment was small and figured this case would hold me over until I could purchase a higher end case when they became more easily available on the market. Well, guess what...6 months later and I am still using this case and have no plans whatsoever to replace it. I love it. Sad, that I wasted so much money on the expensive cases prior to finding this one. Color options are great. This case does not obstruct any of the ports (which others can/have). This case works flawlessly with the iPad, when the cover is closed the iPad shuts immediately off and when opened the iPad turns on immediately. I access this iPad using this case about 12 separate times a day, 7 days a week so that is about 2,000+ times I have directly used this case and have had no issues whatsoever. Shocking, I know. That has not been the case with the higher end cases. Don't get me wrong not all cases are bad, but this case definitely stands out. Now, here is the best part...it does not interfere with my InvisibleShield. WOW! This is the FIRST case that I have purchased, seen and used that does not interfere with the use of the InvisibleShield. Point blank I am a happy camper. I thought for sure there would be wear and tear after much use on this case because of the price point, but no it remains in perfect condition and has held up perfectly. Easy to clean. High quality. Also, what I noticed was the iPad 12.9 Pro is significantly lighter while much bigger than the iPad Air . It was important that this case kept the iPad 12.9 Pro light and it does. The case does not add any noticeable weight to the iPad. Bottomline, I do not have any complaints or issues with this case. When I buy another iPad, I will be right back here buying another case without hesitation. It is a slim case and not bulky. Fits easily in purse.

I received the case on the expected day and it is what I expected. I like the fact that the back part encloses the iPad up to the glass screen and have wholes for all buttons and connectors. It fits really well.The top part (which is connected on the left side with the back cover) fully covers the screen. When folded to create the stand for the IPad it keeps it at a comfortable angle for viewing when placed in a flat surface. When used with the iPad on the typing position, it still provides a comfortable angle for viewing and typing.The material feels good on the hands and the case does not add much volume or weight to the iPad. I prefer this material to leather. Keep in mind that this is not a rugged case. This is not something that is designed to protect your iPad from hardcore use. If you keep letting your iPad fall all the time then maybe that is not the cover for you.That said, I have bought several cases using this style and similar materials for my two previous iPads and I have never had any problems. With time it is possible that the front cover connection to the pack cover will stretch a little. However, it took a lot of time for that to happen with my other cases. For the price, I think when that happens, if the losen standing angle bothers you, you can just buy a new one.I would definitely recommend this cover.

This case fit my older 2nd generation 13" iPad Pro. I was worried about compatibility issues with an iPad that old but this one is great. It was very easy to install, the iPad snapped right in. It allows for easy access to the home, power and volume buttons and the charging port is easily accessible with no hindrance. I love the blue color as well.

(Review of the matcha green): Love the color!Background info: I used to own the $59 cover case made by Apple but it was getting worn out. I wanted to buy a new one so this is my honest review of the JETech in comparison..*JETechQuality 3/5Value 4.5/5AppleQuality 5/5Value 3.5/5Things I liked:- color options 🤌🏼- sturdy, durable🪜🪑- fits snug, snaps on perfectly 👍🏼- sleek lookThings I didn’t like much:- very heavy- weaker magnet 🧲- inside of cover is rougher material- stiff, not as flexibleQuality wise, this cover is just okay; it’s enough to keep for anyone that just wants something that does the job well. Compared to Apple, the magnets on the cover aren’t as strong so I can’t stand up my iPad unless I fold it with the inside cover on the outside. It also adds a lot of weight and so its feel closer to holding a laptop. I compared the inside cover material of the JETech to the Apple cover in one of my photo reviews (The Apple has a more soft and fibrous material, the JETech is giving closer to sandpaper)While the material is a lot cheaper, the quality is still really good for the price point when comparing to how much Apple charges. It still does the job well and I love the color options!

Nice product

Hard to find anywhere else, nice & durable

These are the thinnest, lightest cases for iPads.I use them daily, almost all day and they last about 2 years.For the price I don’t mind buying again.

The price is definitely right, but there are annoyances that prompted me to return this one.1). The cover doesn't (easily) stay fastened to the back when open. This is probably something to do with magnets being X strength and the thickness of the hard plastic back cover being a bit too much. There should've been secondary magnets in the back cover and if there are, they're not strong enough. Holding the iPad up in bed or reclining on a couch is already a chore w/ the 12.9" -- having to keep re-affixing the flap is a dealbreaker in itself.2). There's no issues with the cover lining up right for the most part - no more so than the Apple backless cover, anyway. Not perfect but it usually hits the 'smart' magnets for on/off. It feels a bit more solid than the Apple product and at a fraction of the price, but the lack of any padding on the hard plastic rear cover pretty much guarantees there will be scuffing and scratching of the metal finish and reflective Apple logo. Seems like kind of a no-brainer, most cases have some kind of protection there.3). I realize more materials means more weight, but this adds over 12oz to an already big, heavy tablet making it significantly heavier. Again, holding the thing up suddenly becomes a major chore, especially if you have tennis elbow, carpal tunnel, creaky or sore joints or other falling-apart body issues.4). Something I stupidly realized after ordering -- no Apple Pencil holder.

Bonne finition.

Materiali molto belli e resistenti, case anche per il retro dell’iPad. Colore molto bello. Temevo non esistessero più custodie per questo antico modello, questa è stata una bellissima sorpresa!

Quite to the satisfactory. The cover is rigid by that I mean it is going to protect the device quite well. The front foldable cover doing its purpose and when opening it wakes the device and when close it sleeps the device auto. The side buttons and camera are all well aligned with the holes being provided. Let me be very clear the cover is for 2nd Generation 2017 ipad pro. I am saying this because I tried the 2018 cover version which does not work.Yes it is value to the money, although it would be great if reduced a bit more. It looks great and the back side is a bit blacky and transclucent. Fits perfect yes, and as I have already described above it is compatible quite well. Ya the last one - magnet strength, as suggested by Amazon review Ideas, yes there is magnet strength and it is ok but could make it a bit more stronger.Last I would like to put a suggestion i.e. please consider to put a hole for holding the 1st gen Apple pencil. not the 2nd Gen but the 1st gen pencil since this ipad Pro works only with the first Gen. If that be included it will be an all round perfect cover.Thanks for reading this honest review.

Ich bin überaus zufrieden mit dieser iPad Hülle und möchte meine Begeisterung gerne teilen. Diese Hülle hat mein iPad zu einem noch vielseitigeren Begleiter gemacht.Die Passform ist exzellent und ich war angenehm überrascht, wie schlank und leicht mein iPad in der Hülle bleibt. Sie schützt nicht nur vor Kratzern und Stößen, sondern verleiht dem Gerät auch eine zusätzliche Eleganz. Die Hülle fühlt sich angenehm hochwertig an und die Verarbeitung ist wirklich gelungen.Das integrierte Stand-Feature ist einfach genial. Ich kann mein iPad in verschiedenen Winkeln aufstellen, was das Ansehen von Videos, das Lesen von E-Books oder das Arbeiten zum Vergnügen macht. Die Standfunktion ist stabil und sicher, so dass ich mir keine Sorgen um ein Umkippen machen muss.Ein weiteres Highlight ist die automatische Ein- und Ausschaltfunktion. Wenn ich die Hülle öffne, erwacht mein iPad sofort zum Leben, und wenn ich sie schließe, wird das Gerät automatisch ausgeschaltet. Das spart nicht nur Energie, sondern ist auch äußerst praktisch.Die Aussparungen für Kamera, Tasten und Anschlüsse sind perfekt platziert und beeinträchtigen in keiner Weise die Bedienbarkeit meines iPads. Zudem lässt sich die Hülle mühelos anbringen und abnehmen.Insgesamt bin ich von dieser iPad Hülle absolut begeistert. Sie bietet Schutz, Funktionalität und Stil in einem und hat die Art und Weise, wie ich mein iPad nutze, wirklich verbessert. Ich kann sie ohne Zweifel jedem iPad-Besitzer empfehlen, der das Beste aus seinem Gerät herausholen möchte.

جميل وعملى معايا بقالوا سنه