RUNCCI-YUN 5.5 x 2.1 MM 10A DC Power Jack Socket with Mount Connector Adapter, Female Panel Mount Socket with Cable & Barrel Jack Plug

Wanted these for the sockets primarily, but to have the plugs is a bonus. Nicely constructed panel mount sockets, which you secure from the inside, I've been looking for ones that can be secured from the outside, which would mean that I could complete the wiring of my project without worrying about feeding any cables through the front panelling, which I often forget to do, and end up having to resolder. These were the only ones I could find, so to recap, you have to feed the leads through the panel first, then secure on the inside. The sockets themselves have an ample amount of screw thread, so can be used on panels with a thickness of about 4mn, which is rare to find.

Does the job

Teszi a dolgát!

Only needed one but perfect for fixing my cross trainer

I used these to make up a power distribution box to feed some Tapo wifi cameras,So one socket for power in from a 2 amp 9 volt DC PSU, then 3 sockets out to the cameras, and made up custom length power leads with a jack plug on each end.Much better than finding room to plug in 3 x 9 volt PSU's... one for each camera, and then cable tying the wires out of sight, but meaning i need to cut the cable ties when i move the items the cameras are mounted on.

Seem well made and can't find too much to fault. The barrels are pretty short which made be an issue if using normal long barrel plugs in them. The one thing i notice is they plug together quite stiffly

I am very happy with them made form good material everything you need to power any kind of hobble,

Good item, makes power feed to model railway very tidy.