How to Use the Caviar Maker Kit1- Slip the flexible tube onto the fitting of the caviar maker.2- Add the desired caviar mixture to the caviar maker tray. A minimum of 75 ml must be in the tray in order to avoid breaking a vacuum when it is aspirated.3- Replace the top section of the caviar maker over the tray containing the caviar mix. The tips of the 96 wells will now be immersed in the caviar mixture.4- Back off the syringe plunger to 5cc. Creates air space to provide an extra push at the end of the dispensing cycle.5- Attach the tubing to the syringe.6- Aspirate the syringe plunger to the 20 ml mark on the barrel of the syringe in slow and steady motion.7- Carefully lift the caviar maker from the tray and place it about 3 inches over the calcium bath. Slowly depress the syringe plunger from 20ml to 0 ml.8- After a minute, remove the caviar spheres from the calcium bath, rinse them in a clean water bath and serve immediately.Cleaning the Caviar Maker1- Remove the syringe, fill it with air, connect it to the hose and pump air into the caviar maker to expel any liquid left inside.2- Remove hose and syringe from caviar maker.3- Flip the caviar maker upside down and rinse with warm water the pipettes.4- Keep it under running warm water until the caviar maker box is almost full of water.5- Block the hose connector with one finger and vigorously shake the caviar box sideways with the pipettes pointing downwards.....Package Include:1 x Caviar Box1 x Caviar Spoon
Trustpilot
5 days ago
1 month ago