Dorman 722-001 Rear Rearward Leaf Spring Shackle Compatible with Select Ford / Mazda Models

These are sturdy replacements. Took awhile to get all the old ones off but these worked out perfect. We used the bolts that came with it and torqued to spec after lowering back down and had no issues with the bolts. I couldn't find a place with different bolts to buy at the time as most people are saying the bolts are crap. No problem with this item and it worked great and was half the price of the auto parts store. highly recommend.

Good quality and a perfect fit

2000 Ford Ranger 2WD. Original bushings have a center steel tube surrounded by thick rubber bushing that contacts the springs. These have a center steel tube and an outer steel tube with a thinner rubber bushing in between. They worked fine, but you'll need a bushing tool to drive these into the springs.

9/2/21: Great product so far for my 2002 Ford Ranger XLT 4x4 4.0. I cannot stress enough, just remove the bed (8 bolts in my case), it's perfect access.. My wife and I lifted it off/on its fairly lightweight just awkward imo. I went a step further and sanded with 40 grit and 1 can of rustoleum paint per side. I needed a 6pt 17mm, 15mm, 18mm and 21mm socket and combo wrench, I also did bracket hanger too, hence more sizes. I had to grind EVERYTHING existing off with angle grinder.. Held weight nicely when I lowered. Happy so far! I also used a TON of antiseize on all mating surfaces and every bolt (I love New England but damn, winter is bad on my truck lol). All bolts (shackle and bracket) should be torqued to 65-87ft/lb.Side note, I used a floor jack to slightly raise the suspension so I could remove the broken components and install new. You don't need to lift the tires off the ground just a bit of upwards pressure with the jack is all you need. You may have to raise/lower slightly as needed to align the holes on bracket to the frame but no big deal. You shouldn't actually be working under the truck if you remove the bed.8/17/24: I no longer own the truck but these components are still in motion all these years later. Solid product!! 🫡

1998 Ranger 2wd. Went in despite the terrible condition of the vehicle it's repairing.

Replaced my 01' Ranger shackles and brackets. They were very rusted and started to come apart. And the bushings and bolts were seized so they weren't moving at all Install wasn't bad... make sure you spray down the bolts with kroil to free them up but pretty solid piece! Overall nice quality and replaces OEM piece. Fit was great!

They did exactly what I needed them to. Good quality.

Nice that all required hardware is included!

Good stuff underneath a ford ranger bed or in bed

The shackle comes with the bushing and the necessary bolts. You will need an 18mm socket and wrench and a 21mm wrench to counter hold the bolts. They fit perfectly in the mazda truck / ford ranger. Will replace the rusted OEM part

Perfect fitment for 2008 Ford Ranger. Well made and was 100$ cheaper than auto store and was delivered to the door. Thanks Amazon.

Arrived on time and everything that was described came with the package.

It fit perfectly. And came with the bushing for the spring also. It was 1/2 the price of the jobbers in my aria. Came with both bolts and nuts.