LFJ3.54 in/90 mm Cable Pulley 360 Degree Rotation Traction Wheel for LAT Pulley System DIY Attachment Lifting Blocks,hoists,Ladder Lift, Gym Equipment, DIY Home Projects, Clothesline, Shop Lifts (1)

I used this to make a DIY cable pulldown and low row and it works perfectly. It replaced a Home Depot pulley that did not work nearly as well. The pulley is large and very smooth with no squeaking or messy grease or oil leaking out. The swivel eye in the top is perfect and seems robust enough for the weight I'll be lifting. The one thing that would be nice is to have a quick way to pull the bolt out for cable changes (cotter pin maybe). Otherwise, to have a pulldown and a low row setup, you'll need to unbolt the shaft and add the longer cable OR just buy 3 pulleys and have 2 different assemblies. Great product and perfect for my needs.

I bought 3 of these for a lat pull system and a cable row system in my home gym. They work really well. They make no noise and seem to have no friction. These are really great pulleys.

Bought 3 of these pulleys. Used 2 for a homemade high cable crossover using my spotter arms attached to the highest hole setting on my power rack. Smooth function. The third I used by attaching to a 2 by 4 piece of wood for a home made belt squat using pull boxes I built and the pully system I have attatched to my power rack. Pulleys seem to be of good quality and arevworking great in these two applications. For the money can’t be beat. Will have to see how they hold up over time

Tried using crappy tiny little pulleys from Home Depot which failed miserably. These are awesome. Just like being in the gym. Smooth action, noiseless, no need to oil them. Same resistance up or down, no drag. Awesome!

I have three of these that I use in my home gym setup. They're strong, smooth, and silent. No squeaks at all. No dragging feeling at all. I've used them to pull over 200 lbs with no issues. They really do the job well.My problem with them is that they aren't dummy-proof, and sometimes I'm a dummy. There's a fairly big gap between the wheel and the sidewall where the cable can get stuck if you aren't careful. If the cable is in the groove and there's tension on it, there are zero problems while you're using it. It's when you're changing out weights that things can go wrong. You change them out, there's slack on the cable for a while, and it often jumps out of one or more tracks on a pulley. You have to check each pulley EVERY SINGLE TIME before lifting again to make sure the cable is in the grooves where it needs to be. If you don't, there are problems. So far I've forgotten to do that twice, and each time the cable got stuck and the cheap coating got chewed up. (The cable you see in the pics is 3/4")I may start looking for a different pulley that doesn't have such a big gap to deal with. I admit this is user error, and it's the only problem I have with these things. If you're confident in your ability to remember to check 100% of the time, or if you're going to use them in a setup where there will never be any slack, then I absolutely recommend these pulleys. They've been everything I could want in a pulley otherwise.

Initially bought a Home Depot pulley for a lay pull down system.. they are absolute garbage.. I decided to buy this pulley and it is night and day.. It is very quiet and have been working great.

Exactly what I was looking for from a pulley. Also simple construction that's easy to work with, sometimes constructs like this can be a bit more complicated than necessary and cumbersome or easy to break as a result.

The pulley is strong, quiet, and smooth. Works very well.

Ottimo prodotto, lo utilizzo in barca a vela per la cimetta dell' avvolgi fiocco

The quality is good enough. I have personally tested it with 100kg and it held that. But I woulnd't trust it with much more than that. I think their specified 200kg is the breaking load and not the working load. Probably going to upgrade to the bells of steel pulley.

Aguanta mucho peso y es muy silenciosa. Muy recomendable.

Having had many cables fray using only about 60 kilos. I thought I’d try this as it forces the cable through a less acute angle than the metal pulleys.Still holding strong and smooth after a lot of work.And, no cable fraying!Recommended

Bon rapport qualité prix pour ces grandes poulies, solides, et livrées avec 2 grands mousquetons et 2 larges sangles. J'ai commandé 2 kits de 2 poulies + 1 poulie seule chez le même vendeur afin d'équiper un rack de musculation (l'excellent rack 900 de chez Decath') en poulies d'angles. Soit 4 poulies à chacun des angles du rack et une poulie accrochée à la poulie basse du rack. Et ça fonctionne très bien pour un total d'environ 100€ les 5 poulies. Ainsi mon rack 900 évolue et me permet de multiplier les exercices notamment pour le travail des pectoraux et du dos. Dans cette optique vous aurez besoin également d'un long câble et de 2 poignées que vous trouvez sans problème sur Amazon. Quant à l'expédition, j'ai reçu le tout en 48h. Génial ! ;)