3423VPC 105" by 3/4" Timber Wolf Bandsaw Silicon Steel Low Tension Resaw Blade

I have been using this to resaw dried mesquite logs. This blade is awesome. Tracks true and straight, and cuts thru dried mesquite with ease on a 1 hp bandsaw. Great blade!

These are great resaw blades that stand up over time. They cut clean and fast, which is about all one can ask of a blade. It's all ready to go when you put it on, so there's no complicated work to set the teeth or anything else. Load and go!

I was amazed at how well it cut and how smooth the finish was after resawing white oak and hard maple. I even resawed the hard maple an 1/8" thick.

This blade cut a clean straight rip in an 8 inch wide board, but I had to spend a lot of time adjusting the tension adjustment on my saw. This blade was a good bit longer than any of my other blades. When I first installed it, there was a 1/2 inch space between the blade and the tire. After a major adjustment, it worked great.

Easy, straight cuts

Great blade, If you're adding a riser block to your 14" bandsaw this is the blade you want for resawing

The blade is packaged in sealed clear plastic with one piece of thin cardboard on the side against the teeth. No retail Timberwolf box and I have no problem with that as it's priced a little lower than the manufacturer and no shipping charge (for Amazon order total over $35). This is the most cost effective way that I found to buy. There is also a Timberwolf information sheet included that identifies the blade model and has some general information about blades, including some knowledge that I did not know (e.g. blade lubrication and other general knowledge). I have not opened it yet but I have no reason to suspect a problem and it looks right.

Nice, aggressive teeth and big gullets for clearing out saw dust. I was having issue with drift, bit I'm new to bandsaw, and mine isn't in great shape to begin with. Once I eased up on the feed rate, cuts stayed nice and straight.

Pricey, but good product, practically the only blade around where the kerf is thin enough so tensioning it would not challenge the stiffness of prosummer band saws. Arrived as promised.

As described

It’s definitely not as good as some reviews. It’s sharp I’ll give it that. No issues cutting red oak or maple, but the blade wander is ridiculous. Soft woods you have to move ridiculously slow or it fishtails and zigzags immediately. On hardwoods, you can actually cut fasteronce you establish a solid line and the wood can essentially help from the deflection. I purchased this while I’m a pinch, but it’s overpriced. My 5/8 Olsen blade cut substantially better. The blade tracking was much better as well. Took it off immediately once a better blade arrived.Unless you absolutely know how to set up your saw and tune it to a new blade, do not purchase this. As well, it’s not ideal for resawing.