CDEFG 2Pcs for 2019-2026 Mazda CX-30 Front Grill Mesh Inserts Trim

What a great product. Put them on in under 8 minutes. 2026 Mazda CX50 hybrid. First use the alcohol wipes to clean the surfaces. Then dry very well. Good idea to pre place them to get the feel of how they fit. Then peel the tapes back about an inch and a half. Bend the red tapes you pulled back towards the front. Then press them firmly so they stay pointing towards the front. Place them in, then pull the tapes. Then press them firmly into place. Fit perfect. This is how the dealer should sell the car.

Excelent product and compatible. Easy installation. Fast shipping.

These front grill mesh inserts beautify and complete what is otherwise an unappealing open space beneath the main grill on a Mazda CX-50. They match the factory grill perfectly, and are a perfect fit. Installation is quick, and I recommend you read other reviews about partially removing the cover on the foam mount tape while positioning, then removing it all when the insert is in place. I also followed the suggestions for adding zip ties (I used one on the top and one on the bottom) to further secure the insert to a post that is already there. It added some time, can be a little tricky, especially the lower zip tie which requires a very thin tie, but I now am confident these inserts will never fall off. IMHO these grill inserts really dresses up the front of the vehicle.

Well made and easy installation on our 2025 Mazda CX-50 Hybrid. A”must” have addition to the CX-50 front grill. It fixes a “flaw” in the CX-50 grill design where the lower grill opening is not covered allowing rocks and other debris to hit the radiator located just inside the grill opening!! Prevents an expensive radiator replacement!!!

Very dope accessory to add to your car! I added this to my 2026 CX-50, and it was a perfect fit and looks great. I added some extra 3M tape before installing for a little extra security, which might be worth doing. I also used a heat gun before installation to help it adhere better. Overall, I’m very happy with how it turned out.

They do enhance the lower front air dam from just being an open space. Easy install. I followed the advice of previous reviews by inserting the outer corners in first then manipulating and snapping the inner sides, under the existing license plate frame and middle radar sensor. My only issue, which resulted in 4 rather than 5 stars, is that while the left panel went in snug as a glove (snapped in place and didn't move with the preinstalled double-sided tape), the right panel was not as snug. There was some play and the double-sided tape on the right panel didn't hold as well. Probably an isolated issue in my case but an issue just the same. I added another layer of 3M double-sided tape and that did help. As other previous reviews suggested, I also used black zip-ties and those worked perfectly as a parachute to confidently securing the panels in place without fear of them popping loose. A trick with the zip-tie application, bend the zip-ties 180 degrees, or 90 degrees in two places, so it can easily thread and curve through the grill and single existing front air dam vertical post, then back out to you to secure. Thread the zip-tie through the upper part of the grill panel as it is better hidden from sight. I didn't tighten the zip-tie until I first adjusted and turned it so the lock nub was turned inside the grill, making it less visible. All in all, a great upgrade and enhancement for the front at a reasonable price.

After buying a 2024 cx-50 and reading up on it, I came across these in a forum and thought would be a good idea, especially for the radiator shutters. Those seem like a very sensitive part you don't want to get damaged.. anyway, I bought these and also a piece of black aluminum metal mesh to put behind it... Took me a bit to make the mesh fit and attach it to these panels ( I used micro zip ties to tie the mesh to these inserts). The inserts fit perfectly in the lower openings. Since I did not want to rely only on the tape to hold it all in place, I ziptied the inserts to the vertical posts in the space for the inserts... Now, almost 10k miles later, they're still attached and it looks very good..

So good. Easy install, looks factory

This is something that should have been OEM from the factory as adding this makes the front of the car look properly finished. I purchased the 320mm version as this extended further behind the licence plate . The item came in a black gloss matching the currrent grill so looks as if it came from the factory that way once attached. My CX-30 is the Australian RHD G20 Touring version and this fitted within the frame fine without being too tight or scratching the trim. I also used 4 small black cable ties on each section to make sure it stays in place as they blend in

For piece of mind, peel the tape already on the grill and replace with; 3M Exterior Attachment Tape, product #38582. The grill fits perfectly into place and gives the front of the CX50 a finished and polished look. Matches the existing grill. Easily installed after cleaning area with TSP and the use of the alcohol wipe, included. Personal opinion, Mazda should have these installed at the manufacturing level.

Nice product perfect fit for my cx30

Very sturdy product and easy to install. It was much more easier to install than I could imagine. Lets see how it holds up to after months.

سيارتي مازدا CX5. موديل 2023 جا عليه بشكل مره ممتاز ولا غلطه وتثبيته سهل جذا ويحمي مقدمة السيارة لك من اي حصى