Carburetor for 2004-2007 Yamaha Rhino 660 UTV Carb

Everything worked great easy to install. The gas filter was wrong size but worked great

This is exactly what we needed.

It's just been installed, so time will tell. It arrived promptly and appears to have no issues. I'd recommend.

The carb appeared new...installed it and it would not run right. I took the fuel bowl off and it was green and heavyly varnished... cleaned it and still would not run right. I cleaned my old.one installed and run beautifully. So.bottom lone it looks like this carb had been used and not.drained entirely.

The carb worked fine but was the wrong spark plug and wrong air filter

Side by side repair

My Rhino 660 was running poorly and I knew it needed a massive carb cleaning. I changed jets and still couldn't get it running correctly. I bought this carb and put in the jets I wanted, the machine now runs perfectly.

Have had a chance to use the unit yet

Old Mikuni needed a bath of My new/very old 2005 Rhino.I changed out the slide, enrichment needle, float bowl, float needle, gaskets.The needle was thinner and more linear than stockthe main jet was a different design so i kept originalthe second jet was way smaller , at least 1/2 the diameterthe slide spring had slightly less weight - open fasterthe throttle return spring was way weaker and I would not suggest it for such a long cable like the one run in the rhino.the diaphram was a bit thicker but nice quality, i kept the original because it moved smoother than the new thicker one.Very nice and would probly work as is , but since your Mikuni is insanely expensive take them both apart and use what you need and keep the leftovers as spares.

Fuel intake line comes right out of the carb causing gas to spray all over and starting a fire, I was lucky I didn’t loose the mashing but all my wiring on that side of motor melted