LED Light Strip Bars Kit - 4X 30cm Display Lighting for Detolf Case/Under Cabinet Shelf - Energy Saving - Low Profile Under Cupboard Strip Lighting (Cool White, 6000K) - UK Plug

Really impressed with these lights. Easy to install & give a lovely light

Brilliant bit of kit, great value for money, speedy delivery and great service. Would recommend and use again

great little set of led lights, OK really pricey, The main led unit/light looks well made. cables was of good size but the control is a simple on/off so no dimmer. And the small connectors, you need to be careful with as they look small and weak and would maybe break over time. But we only tested and we love them. As said alot of money for what they are.

Superb. Only offered them into the place these lights will eventually sit. I just need to drill a small hole at each display shelf and thread the cable through. It's easy enough to connect these lights up to the junction box which will be hidden behind my display unit. A small screw fits at either end of the light too secure them. Connect lights up, stand back and admire your display all lit up. Can be switched on and off via the rocker switch which is a good function to have. You could go one further and put the electric plug into a timed plug. Maybe the makers could add this function as an option. Only thing I don't like is the screw holes are in diagonal corners but I can live with that once fitted. Money well spent I think

4 great led strip lights just what a was looking for to go under shelves in a display unit all wires hidden at the back easy to install.

Great value and slimline lighting for cupboard. I previously installed a set of these lights in a bedroom cupboard and it certainly made things easier to find. I have recently installed another set in a kitchen cupboard that was quite dark in places. It has made the situation so much better. The cable lengths were a little long so it took some time to clip up the excess. The brightness (cool white) is great and easily sufficient for the purpose. Luckily having mains power in the cupboard is ideal as I wanted to steer clear of battery changes with other alternative products that are available.

I've bought 7 of these lights for my detolf cabinets and kallax shelves. They are nice and bright and look excellent in the detolf cabinets, very low profile and blend with the glass if you don't mind some cable management. (I think the biggest issue is the length of the wire for each strip being the same). The adhesive sticks fine to glass and melamine, provided they are cleaned beforehand. I've delayed writing a review for this product because in the past I've bought LED lights from Amazon and after a while they either dim or stop working. Some LEDs can burn out if turned on for hours. As with the title, 1 out of 7 I've bought have recently started to flicker when turned on. The lights when they stop flickering are visibily dimmer. So I tested to see where the problem lies, since I had other sets to test with. The issue I have appears to be with the driver/plug unit. By swapping the strips with another driver, I confirmed the LEDs themselves are working perfectly, and have their full brightness. Unfortunately the drivers are not sold seperately so I will be looking to find an alternative or replacement driver.

Each of these stripes can be either fixed with the included screws or double sided tape. Each strip has a long 1m but quite thin twin cable that plugs into a four way box that can also be fixed with the included fixing kit. It then has a 50cm lead to a low power slim inline switch (we stuck this on with tape also) which then has a further 1.5m or so to the supplied mains adaptor. This all means you have full flexibility how you use them. In our case we wanted to make a 'panel' of four at the top of a glass display cabinet and after a bit if careful cable management it is installed and hardly noticeable. There is no need to use more than one or two strips if you really don't want to as they work independently of each other. The light is a gentle not overtly bright but warm white and it is exactly what was needed. Simple to use but needs a bit of thought to disguise the thin cables. Not the cheapest but overall we are extremely pleased.

Update 5 years later: I currently have 6 detolfs and purchased 6 brand new sets of C Frank lights so that all the lighting matches. Then you were lights are way brighter and have a great frosted diffusion over the housing. The light is evenly distributed and works perfectly in my hot toys detolf setup. The detox and these lights perfectly. I recommend getting four in zip ties as well as clear double-sided tape in order to mount the lights neat, clean and minimalist. The photos in my moody portraits are from the old lights but a similar effect can be seen in the last photo with the purple/blue clone trooper. Update 4 years later: These lights are still going strong and I have done a cleaner wire tuck on them and have the switch on the outside that way the wiring is all clean inside the detolf. Tip is to add a black cloth or curtain at the back which gives it a nice museum look. I often take photos using 2 Ulanzi lights on the sides of the figure but the upper Led lights give a perfect moody portrait look for my 1/6 scale Hot Toys figures. I love these lights and they are definitely reasonably priced even after all these years. Original Review So far I am extremely pleased with the quality of these lights they provide a nice white light color which is not too blue or too yellow. there's a very very slight yellow hint but it is not very bad at all. I'm using them to display my collection in my detolf cabinet and over all, these are perfect. the design of the light housing is clean and has options for screwing the fixture in or using double-sided tape I am using my own 3M double-sided tape as I do not want any leftover residue in the future. The wires are fairly long and provide a good amount of coverage in the video you can see that the top wire reaches almost all the way to the bottom. The button to turn the unit on is very high quality and the unit is very clean looking with white wires and housings of the cable Hub and switch. The power cord to the main wall plug is also a good amount of length measuring approximately 3 1/2 to 4 feet possibly more but it is just right. Overall this is an excellent alternative to the standard Ikea diodor lights which are not available in Canada. In addition, the other china brand led light strip a just won't do as I have tried several of them and searched high and low for a clean setup and good white light kit. The design of this unit is very well engineered. And these work perfectly for displaying my figures in my detolf.

My husband and I rent a display case in a shop for our miniature business. The owners rearranged the displays in their shop and we noticed the natural lighting was much dimmer with the new arrangement. Miniatures require a lot of light in order to see the details. We ordered the Cefrank lights and they made a big difference in the lighting. The lights are easy to install and do not take up a lot of room. They add light without being blinding.

I normally am not a review person but I am very happy with lights they are very easy to install and they look great I will say if the company made a few different versions with a soft or a warm white option and made them dimmable that would be nice but very happy with the outcome of these lights!

Colors are bright, I suggest the cool white colors. A lot more bright than most. Also if you are using for ikea blaladin, purchase 1 cord hider and place in corner for a beautiful display with minimal cords seen.

First off the LEFrank brightness and color is a great improvement compared to 10+yr legacy IKEA warm yellow LED light strips. It really modernizes the Detolfs. The reason for 4, instead of 5 stars is due to the LED cable length since I prefer the LED controller (where all the strips plug into) to be outside and under the display case. I drilled holes at the bottom of each case to run the cables. The alternative would be to run the cable through the front door gap and to the back of the case, which to me is unacceptable. I therefore had to extend the wire length for the top two LED strips. Addditonally, the copper strands double the amount of strands when compared against the CEFranks. With that said it is sufficient to power the LEDs without any issues. This also provides greater flexibility to route and bend wires as necessary. With everything considered, I’d buy again if needed.